| Technical data |
| 1- / 2-channel | 1, 2 |
| Approvals | UL-Recognized |
| Cat. / PL acc. to EN ISO 13849-1 | 4/e |
| Connection | Pluggable screw terminals |
| Output contacts max. | 4 NO contacts |
| SIL CL acc. to IEC/EN 62061 | 3 |
| SIL acc. to IEC/EN 62061 | 3 |
| Thermal current Ith max. | 5 A |
| Width | 22,5 mm |
| Type | BG 5924 |
| Variant |
| Contact equipping | 2 NO contacts |
| Nominal voltage | AC/DC 24 V |
| Approvals and Markings | TÜV, UKCA, CCC |
The Dold emergency stop module BG5924.02 AC/DC24V is a safety-oriented switching component for use in industrial plants, particularly for personnel protection and machine protection functions. It is designed for the safe enabling and interruption of safety circuits and is intended for use in plants that must comply with the requirements of safety standards EN ISO 13849-1 and IEC/EN 62061. The module is available in the variant with 2 normally closed contacts and operates at a nominal voltage of AC/DC 24 V. It is designed for 1- or 2-channel wiring, with a maximum number of output contacts being 4 normally closed contacts. The width of 22.5 mm allows for compact mounting in standard control panels.
Applications
The module is intended for safety-critical applications, particularly in industrial automation, where safe shutdown of machines or plants is required in an emergency. It is frequently used in combustion systems, as it complies with the requirements of EN 50156-1. The certifications TÜV, UKCA, CCC, and UL-Recognized confirm compliance with international safety standards. The application occurs in environments where high reliability and fault-free operation of safety functions are required.
Functions and Equipment in Detail
The BG5924.02 features removable screw terminals, enabling flexible and secure connections to wires. The connection technology supports stranded wires with cross-sections up to 2.5 mm², with the use of ferrules and plastic sleeves according to DIN 46228-1/-2/-3/-4 recommended. The contacts are configured as normally closed, interrupting the circuit when the emergency stop system is activated. The maximum thermal current rating is 5 A, enabling use in systems with moderate loads. The LED indicators for channel 1/2 and operating status provide visual monitoring and fault diagnosis.
Technology Explained Simply
The module operates on the principle of safety-oriented circuitry, where functions such as start, enable, and shutdown occur under controlled conditions. The safety functions are designed for Category 4 and Performance Level e according to EN ISO 13849-1, as well as SIL 3 according to IEC/EN 62061. This means the device is suitable for applications with high safety requirements, where failure of the safety function could have serious consequences. The short-circuit detection between terminal Y1 and ground enhances reliability by detecting potential faults in the circuit early.
Compatibility and Accessories
The module is designed for use in systems with 1- or 2-channel wiring. It can be combined with other components from the Dold portfolio, particularly with additional emergency stop modules or safety relays, to build complex safety architectures. The galvanic isolation in the circuit of the AC 230 V variant (not applicable for this AC/DC 24 V variant) enables isolated signal transmission, which is advantageous in certain applications. The certifications TÜV, UKCA, CCC, and UL-Recognized ensure suitability for use in various markets.
Mounting and Installation
Mounting is performed in standard control panels with a width of 22.5 mm. The removable terminal blocks facilitate installation and maintenance. Wiring is done via screw terminals, with the specified cross-sections and connection techniques (ferrules, plastic sleeves) to be observed. The installation instructions are included in the manufacturer’s datasheet, which serves as the operating manual.
Advantages in Operation
The module offers high safety performance with certifications PL e / Cat. 4 and SIL 3, making it suitable for demanding applications. The LED indicators allow for quick diagnosis of operating states and faults. The compact design and flexible connection technology simplify integration into existing control systems. The short-circuit detection enhances operational safety by detecting potential fault sources early. The certification according to EN 50156-1 makes it suitable for use in combustion systems.