Further information for Dold 0050616 SK8832 AC/DC24V alarm sender
Technical data
Width
17,5 mm
Type
SK 8832
For top hat rail mounting
Variant
Nominal voltage
AC/DC 24 V
Variant
Permanent sound. Pitch fixed
The Dold SK8832 AC/DC24V is an industrial alarm device used for acoustic signalling of faults or limit value exceedances in electrical installations. The device generates a continuous signal tone when supply voltage is applied, making it suitable for integration into monitoring systems, such as measurement relays. It features a fixed tone frequency of 4.5 kHz and a sound pressure level of approximately 80 dB(A) at a distance of 15 cm, ensuring sufficient audibility in industrial environments. The nominal voltage is AC/DC 24 V, with an operating voltage range between 0.8 and 1.1 times the nominal voltage, allowing flexible adaptation to different supply conditions.
Applications
The alarm device is designed for use in enclosures and industrial distributors, particularly in installations requiring acoustic notification in case of errors or faults. It is suitable for single- and multi-family homes as well as industrial applications where clear and unambiguous acoustic signalling is required. The operating temperature ranges from -20 °C to +60 °C, enabling use in a wide range of environments. The operating altitude is limited to a maximum of 2000 m above sea level.
Functions and Equipment in Detail
The device operates in continuous mode and generates a constant tone as soon as supply voltage is applied. The tone frequency is fixed at 4.5 kHz, ensuring uniform perception. The sound pressure level of 80 dB(A) at a distance of 15 cm is sufficient for most industrial applications. The connection terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule), with terminals equipped with self-lifting connection washers. The tightening torque is 0.8 Nm.
Technology Explained Simply
The alarm device is designed for mounting on a DIN-top-hat rail, enabling quick and secure installation in enclosures. The housing is made of a thermoplastic material with V0 rating according to UL 94, ensuring a high flame retardant class. The housing protection rating is IP 40, protecting against contact with fingers and solid objects larger than 1 mm. The terminals have a protection rating of IP 20, protecting against contact with tools. The vibration resistance is specified according to IEC/EN 60068-2-6 with an amplitude of 0.35 mm and a frequency range of 10 to 55 Hz.
Compatibility and Accessories
The SK8832 is manufactured in the S-type design, which means a depth of 100 mm and top-mounted terminals for enclosures with mounting plate and cable duct. The width is 17.5 mm, enabling compact placement in standard enclosures. The devices are available in two types: I-type (e.g. IK _ _ _ _) with 61 mm depth and bottom-mounted terminals, and S-type (e.g. SK _ _ _ _) with 100 mm depth and top-mounted terminals. The S-type is intended for enclosures with mounting plate and cable duct.
Mounting and Installation
Mounting is done via DIN-top-hat rail, enabling quick and secure installation. The terminals are designed for connection with solid or stranded conductors, with connections made via flat terminals with self-lifting connection washers. Terminal identification follows EN 50005, with A1 designated for positive/live conductor and A2 for negative/neutral conductor.
Advantages in Operation
The alarm device provides reliable and unambiguous acoustic signalling in case of faults. The fixed tone frequency and high sound pressure level ensure clear perception. Mounting on DIN rails allows for quick installation and integration into existing enclosures. The robust construction with thermoplastic housing and high vibration resistance ensures long service life even in industrial environments. The IP 40 protection rating protects against mechanical influences and ensures safe operation.