Further information for Dold 0050520 semiconductor contactor 3xAC 10A
Technical data
Approvals
UL
Load current up to
50 A
Load voltage up to
AC 480 V
Number of poles
1-pole, 2-pole, 3-pole
On/Off Input Control
AC/DC, DC
Width
22,5 mm, 45 mm, 90 mm
Type
BF 9250
Signalling output
Temperature monitoring
Variant
Auxiliary voltage
DC 24 V
Contact equipping
with signal contact
Load current
3 x AC 10 A
Load voltage
AC 24 - 480 V
Semiconductor output
3-pole
Approvals and Markings
UL-listed C/US
Variant
Switching at zero crossing. Control input X1 with low current consumption. Monitoring output for the temperature protection
The Dold semiconductor contactor BF9250.03/001 is an electronic switching device for use in industrial systems, designed for frequent and noiseless control of loads such as heaters, motors, valves, and lighting. It features a 3-pole semiconductor output and is designed for an auxiliary voltage of DC 24 V. The load voltage is AC 24 to 480 V, with a load current per pole of 10 A. The device complies with standards IEC/EN 60947-4-2 and IEC/EN 60947-4-3 and carries the UL-listed C/US certification, enabling its use in specific markets, particularly in North America.
Applications
This semiconductor contactor is designed for applications requiring disturbance-free and quiet switching. It is particularly suitable for use in automation systems, where it can be controlled by PLCs (Programmable Logic Controllers) or other digital control devices. The zero-voltage switching ensures that switching occurs at the zero crossing of the AC voltage, minimizing the generation of switching sparks and interference. This is especially important when controlling inductive loads such as motors or transformers.
Functions and Features in Detail
The device features a control input X1, which operates with low current consumption and can therefore be directly controlled by PLC systems or other digital controls. An integrated alarm output enables monitoring of the operating status. Temperature monitoring of the power semiconductors protects the device from overheating and signals a fault via the alarm output. Protection circuitry using varistors provides additional protection against overvoltage. The width is 90 mm, allowing mounting on a DIN rail.
Technology Explained Simply
The function of the semiconductor contactor is based on the use of semiconductor components such as thyristors or triacs, which are electronically controlled. Unlike mechanical relays or contactors, switching occurs without moving parts, resulting in a longer service life and reduced maintenance. The zero-voltage switching ensures gentle switching, extending the life of the connected loads. The temperature monitoring monitors the heat development of the semiconductors and shuts off in case of a fault to prevent damage.
Compatibility and Accessories
The device is designed for use with AC loads up to 480 V and load currents up to 50 A. It is available in various configurations, including 1-pole, 2-pole, and 3-pole variants. The width of 90 mm allows mounting in standard control panels. Control is via DC or AC, with the BF9250.03/001 variant specifically designed for DC 24 V. Compatibility with PLC systems is supported by the control input X1.
Mounting and Installation
The semiconductor contactor is mounted on a DIN rail, enabling quick and secure installation in enclosures. The terminals are clearly labeled: A1/A2 for the operating voltage, X1 for the control input, L1/L2/L3 for the mains connections, and T1/T2/T3 for the load outputs. The terminals are designed for cable connections, with maximum cross-sections to be observed according to the manufacturer's technical data.
Operational Advantages
Operation of the semiconductor contactor is noiseless and disturbance-free, extending the life of connected loads. Electronic control enables precise and reliable switching. The integrated temperature monitoring and alarm output increase safety and facilitate fault diagnosis. Compatibility with PLC systems makes the device a flexible component in modern automation systems.