| Technical data |
| Connection | Screw terminals |
| Enclosure design | Switch cabinet |
| Nominal voltage | DC |
| Output contacts max. | 2 NC contacts, 2 NO contacts |
| Thermal current Ith max. | 8 A |
| Width | 38 mm |
| Type | HL 3094 |
| Variant |
| Contact equipping | Socket without relay |
| Variant | Socket. With free-wheeling diode. |
The Dold coupling module HL3094/101 is a socket for safety relays in enclosure construction, designed for simple contact multiplication and amplification in industrial control systems. It serves as a base for mounting a plug-in safety relay and enables the expansion of the number of output contacts without requiring additional auxiliary contactors or complex circuits. The module width is 38 mm, making it suitable for standard DIN rail mounting. The socket is equipped with a freewheeling diode between terminals A1/A2, which supports the switching off of inductive loads and prevents voltage spikes.
Coupling module
This device functions as a coupling module, transmitting signals from a safety relay to multiple output contacts. It is specifically designed for use in safety-critical applications, where reliability and monitoring of the switching state are essential. The contact configuration includes up to two normally closed contacts and two normally open contacts, with the exact number varying depending on the installed relay. The contacts are mechanically interlocked according to DIN EN 61810-3 (Type A), meaning that a normally open and a normally closed contact are mechanically linked, ensuring that a mechanical fault cannot result in an incorrect switching state.
Functions and equipment in detail
The socket is fitted with screw terminals, ensuring a secure and reliable connection to the wiring. The contact materials consist of AgNi + 0.2 μm Au, providing high electrical conductivity and good wear resistance. The maximum thermal continuous load is 8 A, sufficient for most industrial applications. The operating temperature ranges from -40 °C to +55 °C, allowing use in various environments, including climatically demanding industrial facilities.
Technology explained simply
The freewheeling diode between A1/A2 protects the relay and connected components from inductive voltage spikes that occur when switching off coils or motors. The mechanically interlocked contacts ensure that the switching state can always be reliably monitored — a normally open contact closes precisely when a normally closed contact opens, eliminating the possibility of malfunction. The rated voltage is designed for direct current (DC), with a voltage range of 0.8 to 1.1 times the rated voltage, with exact values varying depending on the relay variant.
Compatibility and accessories
The module is compatible with plug-in safety relays of types HA 5601, HA 5602, and HA 5603, with HA 5601 specifically intended for the socket HL 3094/10_. Combining it with a safety relay allows flexible configuration of output contacts, with up to eight contacts achievable depending on the relay type. Mounting is possible either on DIN rails or via screw mounting, enabling flexible integration into existing enclosures.
Mounting and installation
Installation involves inserting the safety relay into the socket, with mechanical interlocking ensuring a secure connection. Connections are made to the wiring via the screw terminals. Mounting on the DIN rail is achieved using integrated retaining clips, ensuring stable fixation. Compliance with standards IEC/EN 61810-1, IEC 60664-1, and IEC/EN 60947-5-1 ensures conformity with applicable safety and functional requirements.
Advantages in operation
The coupling module offers a cost-effective and space-saving alternative to auxiliary contactors, reducing the number of required components. Simple monitoring of the switching state via mechanically interlocked contacts increases safety and reduces failure susceptibility. The high thermal continuous load capacity of 8 A and the wide temperature range from -40 to +55 °C make the module suitable for demanding industrial environments. The use of AgNi + 0.2 μm Au as contact material ensures long service life and high reliability under load.