Dold 0049179, EAN: 4030641491796

Dold 0049179 IK8701.01/013 DC48V relay

Dold 0049179 IK8701.01/013 DC48V relay

Lieske Part No. 1002159
Mfg Part No 0049179
EAN-Code 4030641491796
Manufacturer Dold
Here only 55,92 EUR
66,54 EUR incl. VAT

Further information for Dold 0049179 IK8701.01/013 DC48V relay

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.16 A
Width17,5 mm
TypeIK 8701
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping1 NO contact
Nominal voltageDC 48 V
VariantWith recovery diodes to reduce switching spikes. Plus on A2+. Contact gab 6 mm
The Dold switching relay IK8701.01/013 DC48V is an industrial relay of the IK 8701 series, specifically designed for use in control and automation technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or switching loads controlled by a PLC. The device is designed for a nominal voltage of DC 48 V and features a contact configuration with one normally open (NO) contact. The width is 17.5 mm, making it suitable for use in standard installation distributors. The housing design corresponds to an installation distributor, allowing it to be mounted directly in distribution boxes.

Applications
This relay is intended for use in industrial and technical installations, particularly in systems that switch lamp loads, such as HQ lamps. It can also be used as an input coupling relay to forward signals from sensors or other devices to a PLC, or as an output coupling relay to switch PLC-controlled loads. The maximum contact configuration is two changeover contacts, with the current variant featuring one normally open (NO) contact. The contact gap is 6 mm, ensuring reliable switching performance even under higher loads.

Functions and Features in Detail
The relay includes a switching position indicator, implemented via a button on the front side. This button also serves for manual actuation of the contacts. When the button is pressed, the contacts are closed; in the de-energized state, the black button is flush with the front edge. This function allows for visual inspection of the switching status and manual intervention if necessary. The contacts are actuated via a toggle armature and a plunger. After the excitation voltage drops, the armature is returned to its resting position by a spring.

Technology Explained Simply
The relay coil is powered by a DC voltage of 48 V. The connection polarity is via A2+, meaning the positive pole is connected to A2. The coil is equipped with protective circuitry at the input, providing reverse polarity protection. Additionally, freewheeling diodes are integrated to suppress switching surges when interrupting inductive loads. This protects the relay and connected components from voltage spikes. The thermal current Ith is up to 16 A, describing the contact load capacity under continuous operation.

Compatibility and Accessories
The device complies with standard EN 60947-5-1, applicable to control devices in control technology. It is suitable for use with 2-wire initiators, with an allowable residual current ≤ 3 mA. This variant is specifically designed for use with inductive DC loads, for example, at DC 220 V with an L/R time constant of 30 ms. The contact configuration is suitable for use with lamps with parallel compensation, such as HQ lamps, with a maximum parallel compensation of 100 μF. The contacts are coated with a 5 μm gold layer, improving switching performance for small loads, although this coating may burn off under higher currents.

Mounting and Installation
The relay is mounted in standard installation distributors, with the width of 17.5 mm enabling compact placement. Mounting is done via the designated terminals, designed for connection polarity A2+. The front side of the device is designed for operation and inspection, with the switching position indicator and manual actuation button directly accessible. Installation must follow the requirements of standard EN 60947-5-1, ensuring secure and correct electrical connections.

Advantages in Operation
The relay offers high reliability due to the integrated protective circuitry and freewheeling diodes that suppress voltage spikes. The switching position indicator allows for quick visual inspection of the operating status. Manual actuation of the contacts via the front button provides an additional function for maintenance and testing purposes. The high thermal load capacity of 16 A ensures stable performance even during prolonged operation. The construction is designed for industrial environments, ensuring mechanical stability and electrical safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002159
qrcode für Dold 0049179 IK8701.01/013 DC48V relay