Dold 0046682, EAN: 4030641466824

Dold 0046682 BO5988.47/200 DC24V 10S emergency stop module

Dold 0046682 BO5988.47/200 DC24V 10S emergency stop module

Lieske Part No. 1001993
Mfg Part No 0046682
EAN-Code 4030641466824
Manufacturer Dold
Here only 607,40 EUR
722,81 EUR incl. VAT

Further information for Dold 0046682 BO5988.47/200 DC24V 10S emergency stop module

Technical data
1- / 2-channel1, 2
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionPluggable screw terminals
Output contacts max.1 NC contact, 6 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.10 A
Width100 mm
TypeBO 5988
Cross fault detectionYes
Variant
Contact equipping3 NO contacts, 1 NO contact delayed, 1 NC contact as signal contact
Nominal voltageDC 24 V
Time range10 s
Approvals and MarkingsTÜV, UKCA
VariantAuxiliary supply is not nesseary during elapse of time: tv fixed
The Dold BO5988.47/200 DC24V 10S is an emergency stop module of the BO 5988 series, developed for the safe control and monitoring of machines and plants in industrial applications. It is particularly designed for person and machine protection, emergency stop circuits, and monitoring of sliding safety guards. The device is designed for use in safety-critical applications and meets the requirements for safe control systems as defined by the Machinery Directive and functional safety standards.

Applications
This module is used in industrial plants where immediate and reliable shutdown is required in hazardous situations. Typical applications include machines with moving parts, presses, machine tools, or plants with sliding safety guards that must be monitored. The function of the emergency stop module is to safely shut down the plant via an emergency stop button, with reset only possible after a defined delay time to prevent unintended restart.

Functions and Equipment in Detail
The device features a contact configuration with 3 normally closed contacts, one delayed normally closed contact (10 seconds), and one normally open contact as a signaling contact. The delayed function enables controlled shutdown, which is necessary for example when restarting a machine after an emergency stop event. The rated voltage is DC 24 V, which is common for many industrial control systems. The width of 100 mm allows mounting in standard control panels. The connection technology uses removable screw terminals, suitable for wires with 2 x 1.5 mm² (with ferrule and plastic sleeve DIN 46 228-1/-2/-3/-4) or 2 x 2.5 mm² (with ferrule DIN 46 228-1/-2/-3).

Technology Explained Simply
The module operates on the principle of safe control. It detects faults in the control circuit, such as a short circuit at the emergency stop button, and responds with a shutdown. The short-circuit detection is activated and ensures that a short circuit in the emergency stop control circuit is detected and the plant is shut down. An integrated short-circuit and overvoltage protection protects the device from damage due to electrical disturbances. The LED indicators for channel 1, channel 2, and power supply status allow visual monitoring of the operating status. The feedback circuits X1-X2 are used to monitor external contactors to ensure that the shutdown is actually effective.

Compatibility and Accessories
The module is designed for 1- or 2-channel wiring, increasing flexibility when integrating into existing control systems. It can be configured with an automatic start function or activation via the start button. The SIL performance level (SIL CL) 3 according to IEC/EN 62061 and the Safety Integrity Level (SIL) 3 according to IEC/EN 61508 guarantee high safety performance. The Performance Level (PL) e and Category 4 according to EN ISO 13849-1 confirm suitability for safety-critical applications. The certifications TÜV, UKCA, and UL-Recognized confirm compliance with European and international safety standards.

Mounting and Installation
Mounting is done in standard control panels with a width of 100 mm. The removable terminals facilitate installation and maintenance. The connection terminals are designed for various wire cross-sections, enabling flexible wiring. The feedback circuits X1-X2 must be connected according to the circuit diagrams to ensure monitoring of external contactors.

Advantages in Operation
The module offers high reliability through integrated protection functions and fault detection. The delayed reset prevents unintended restart. The LED indicators enable quick diagnosis of the operating status. The certifications and safety approvals ensure suitability for safety-critical applications. The modular design and removable terminals simplify maintenance and replacement.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001993
qrcode für Dold 0046682 BO5988.47/200 DC24V 10S emergency stop module