Dold 0046632, EAN: 4030641466329

Dold 0046632 IL8701.06/006 DC125V relay

Dold 0046632 IL8701.06/006 DC125V relay

Lieske Part No. 1152354
Mfg Part No 0046632
EAN-Code 4030641466329
Manufacturer Dold
Here only 157,00 EUR
186,83 EUR incl. VAT

Further information for Dold 0046632 IL8701.06/006 DC125V relay

Technical data
Enclosure designDistribution board
Output contacts max.3 C/O contacts
Thermal current Ith max.16 A
Width35 mm
TypeIL 8701
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping2 NC contacts
Nominal voltageDC 125 V
Variant6 mm contact opening, for switching large inductive direct current voltage loads
The Dold IL8701.06/006 DC125V is an industrial switching relay of the IL 8701 series, specifically designed for use in installation and control technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or controlling PLC-controlled loads. The device is designed for operation with a nominal voltage of DC 125 V and features a contact configuration with two openers. This variant is designed for switching large inductive DC loads, with a contact gap of 6 mm ensured to achieve the required mechanical separation and switching capability under high loads.

Applications

The relay is suitable for applications in industrial and technical environments, particularly where safe and reliable switching of inductive loads is required. Typical applications include controlling motors, transformers, or other inductive consumers in DC operation. The design allows use in distribution and enclosure systems, where stable and maintenance-friendly installation is required. The width of 35 mm corresponds to the standard for installation distributors and enables compact mounting in existing control systems.

Functions and Equipment in Detail

The device features a manual actuation button for the contacts, which also serves as a switching position indicator. When the relay is energized, the button is pushed in, indicating the closed contact position. In the de-energized state, the black button is flush with the front edge, indicating the open contact position. This function enables quick visual inspection of the operating status without additional measuring instruments. The contacts can also be actuated via a toggle arm with plunger, which returns to its resting position by spring force after de-energizing.

Technology Explained Simply

The relay coil is connected to a DC voltage source via terminals A1+ and A2+. The protective circuit at the coil input protects the device against voltage surges and reverse polarity. For DC devices, a freewheeling diode is integrated, suppressing switching surges and thus increasing the relay's service life. The maximum thermal current rating (Ith) is 16 A, defining the contact load capacity under continuous operation. The contact configuration is designed for two openers, with a maximum contact arrangement of up to three changeover contacts possible, depending on the selected variant. The 6 mm contact gap ensures sufficient mechanical separation, especially for high inductive loads.

Compatibility and Accessories

The relay is suitable for actuation with 2-wire initiators, with an allowable residual current ≤ 3 mA. Actuation occurs via terminals A1+ and A2+, with polarity fixed for DC voltages. The devices comply with standard EN 60947-5-1, which defines requirements for switching devices used in electrical installations. The width of 35 mm allows mounting in standard installation distributors, with variants also available in 17.5 mm or 52.5 mm widths.

t
Mounting and Installation

Mounting is carried out in installation distributors or enclosures using the provided mounting elements. The connection terminals are clearly labeled (A1/A2, 11/12/14, etc.) and allow unambiguous assignment of wires. The manual actuation button on the front facilitates testing and maintenance without requiring additional tools. The devices are designed for use in industrial environments and meet requirements for reliability and longevity.

Advantages in Operation

The relay offers high thermal load capacity with an Ith of 16 A, ensuring safe operation under continuous loads. The integrated protective circuit at the coil input protects against voltage surges and reverse polarity. The manual actuation button with switching position indicator enables quick visual inspection of the operating status. The 6 mm contact gap ensures reliable separation for high inductive loads, increasing contact service life. The design is intended for use in industrial control systems and provides high operational safety.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1152354
qrcode für Dold 0046632 IL8701.06/006 DC125V relay