Further information for Dold 0045350 emergency stop module BN5930.48/204 AC230V 50/60Hz
Technical data
1- / 2-channel
1, 2
Cat. / PL acc. to EN ISO 13849-1
4/e
Connection
Pluggable screw terminals
Output contacts max.
1 NC contact, 3 NO contacts
SIL CL acc. to IEC/EN 62061
3
SIL acc. to IEC/EN 62061
3
Thermal current Ith max.
10 A
Width
100 mm
Type
BN 5930.48/204
Cross fault detection
Suited as safety gate monitor
Variant
Contact equipping
3 NO contacts, 1 NC contact
Nominal voltage
AC 230 V 50/60 Hz / DC 110 V
Approvals and Markings
TÜV
Variant
With cross fault detection by connecting phase and neutral, max. 230 V
The Dold emergency stop module BN5930.48/204 is a safety-oriented switching component for use in industrial plants, particularly in emergency stop and safety door applications. It serves to safely interrupt a safety circuit and is designed for operating voltages of AC 230 V 50/60 Hz and DC 110 V. The device is designed as a safety relay and enables monitoring of emergency stop buttons and safety doors, and is also suitable for longer wiring in the emergency stop circuit, allowing a large distance between module and button.
Applications
The module is used in plants where the safety of personnel and machines is paramount. It is suitable as a safety door monitor and can be integrated into systems with emergency stop buttons. The application is in industrial environments where safe and reliable shutdown is required in hazardous situations. The 1- or 2-channel wiring enables flexible integration into existing safety architectures.
Functions and equipment in detail
The device features cross-short detection, implemented by connecting to phase and neutral conductor, with a maximum voltage of 230 V. This function detects short circuits in the emergency stop circuit and thus prevents false releases. The output contacts consist of 3 closers and 1 opener, with contacts rated for a nominal voltage of AC 400 V. The connection technology uses removable screw terminals, enabling flexible and secure wiring. Additionally, LED indicators for channel 1, channel 2, and mains supply visually display the operating status.
Technology explained simply
The module operates according to industrial safety function standards. It complies with Performance Level (PL) e and Category 4 according to EN ISO 13849-1, ensuring high safety performance in critical applications. Additionally, it meets the requirements for Safety Integrity Level (SIL) 3 according to IEC/EN 62061, enhancing reliability in the event of faults and disturbances. The thermal current Ith max. is 10 A, defining the contact load capacity. The width of 100 mm allows mounting in standard control panels.
Compatibility and accessories
The module is designed for use in 1- or 2-channel safety circuits. It features a feedback circuit (X1 – X2) that can be used to monitor external contactors. The dual voltage version (AC 230 V / DC 110 V) offers flexibility when integrating into existing power supplies. Certification by TÜV confirms compliance with applicable safety standards.
Mounting and installation
Mounting is done in standard control panels with a width of 100 mm. The removable screw terminals facilitate wiring and maintenance. The LED indicators support diagnosis of the operating status. Connection points are clearly labeled to prevent incorrect wiring.
Advantages in operation
The module offers high safety performance through the combination of cross-short detection, 1- or 2-channel wiring, and high safety standards (PL e, Category 4, SIL 3). The LED indicators and feedback circuit for external contactors increase system transparency and reliability. Use in long wiring in the emergency stop circuit allows flexible positioning of buttons and reduces the need for additional components.