Dold 0044709, EAN: 4030641447090

Dold 0044709 IK8802.01 AC/DC24V coupling relay

Dold 0044709 IK8802.01 AC/DC24V coupling relay

Lieske Part No. 1001826
Mfg Part No 0044709
EAN-Code 4030641447090
Manufacturer Dold
Here only 40,60 EUR
48,31 EUR incl. VAT

Further information for Dold 0044709 IK8802.01 AC/DC24V coupling relay

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.10 A
Width17,5 mm
TypeIK 8802
Variant
Contact equipping1 NO contact
Nominal voltageAC/DC 24 V
The Dold coupling relay IK8802.01 AC/DC24V is an industrial coupling relay used as an interface between control and power levels. It serves for potential isolation and enables galvanic separation of control signals and loads in industrial installations. The device is designed for use in installation distributors and is mounted on a DIN rail. The width is 17.5 mm, allowing compact placement in enclosures. The rated voltage is AC/DC 24 V, with a voltage range between 0.8 and 1.1 times the rated voltage. The contact configuration includes one close contact, with the maximum contact configuration for the IK 8802 device type reaching up to two changeover contacts.

Applications
This relay is suitable for use in industrial control systems, such as in automation technology, machine building, or building technology. It is frequently used to transmit control signals from a control system (e.g. PLC) to a power level without establishing a galvanic connection. Potential isolation protects the control level from disturbances caused by loads or mains voltage fluctuations. The operating temperature ranges from -20 °C to +55 °C, making the device usable even in climatically demanding environments.

Functions and Equipment in Detail
The relay features an LED indicator that lights up when the relay is energized. This indicator is only available at the rated voltage AC/DC 24 V and serves as a visual confirmation of the operating status. The pickup and drop-out time is each under 10 ms, enabling a fast response to control signals. The thermal current Ith is up to 10 A, with the permissible contact load depending on the ambient temperature. The mechanical life expectancy exceeds 50 million switching operations, indicating high robustness and longevity.

Technology Explained Simply
The relay operates according to the standards IEC/EN 61810-1 and IEC/EN 60947-5-1, which apply to control relays and switching devices. The switching capacity according to AC 15 is 3 A at AC 230 V for the close contact, while the open contact can switch 1 A at AC 230 V. For direct current (DC 13), the switching capacity is 1 A at DC 24 V. The electrical life expectancy at 3 A and AC 230 V is 250,000 switching operations for a changeover contact. Short-circuit resistance is ensured by a maximum fuse rating of 10 A gG/gL for the variant with one changeover contact and 6 A gG/gL for the variant with two changeover contacts. The terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with sleeve DIN 46228). The tightening torque is 0.8 Nm.

Compatibility and Accessories
The relay is designed for mounting on a DIN rail (IEC/EN 60715) and can therefore be installed in standard enclosures. It is available in various contact configurations, with the described variant IK8802.01 featuring one close contact. Variant IK8802.11 offers one changeover contact, and IK8802.12 offers two changeover contacts. Switching functions for small loads (0.1 ... 60 V, 1 mA ... 300 mA) are available, with the variant ending in /005 specifically designed for this application. Variant /023 is available for AC/DC 230 V without LED indicator.

Mounting and Installation
Mounting is done via a DIN rail, with the terminals equipped with flat terminals with self-lifting connection washers. The terminal markings follow EN 50005: A1 (control signal L or DC+), A2 (neutral conductor N or DC-), 13/14 (close contact load), 11/12/14, 21/22/24 (changeover contact load). Installation is carried out in a closed enclosure, with the enclosure protection rating being IP 40. The terminals have a protection rating of IP 20. The operating altitude is limited to a maximum of 2000 m above sea level.

Operational Advantages
The relay offers high thermal load capacity with an Ith of 10 A, enabling safe and reliable switching of loads. The short pickup and drop-out time of under 10 ms ensures precise and fast response. The LED indicator at AC/DC 24 V facilitates diagnosis and maintenance, as the operating status can be visually checked. The high mechanical life expectancy of over 50 million switching operations reduces maintenance effort and increases operational safety. Compliance with standards IEC/EN 61810-1 and IEC/EN 60947-5-1 ensures reliability and safety in industrial applications.

Protection Rating and Environmental Conditions
The enclosure has a protection rating of IP 40, protecting against solid objects larger than 1 mm and against splashing water from any direction. The terminals are protected to IP 20, protecting against finger contact and against splashing water from any direction. The operating temperature ranges from -20 °C to +55 °C, with storage temperature ranging from -40 °C to +80 °C. Climate resistance is tested according to humidity-heat test (IEC/EN 60068-2-30). Vibration resistance is specified with an amplitude of 0.35 mm at a frequency of 10 to 55 Hz.

EMC and Safety Requirements
The device meets electromagnetic compatibility (EMC) requirements according to IEC/EN 61000-4-2 to -4-6. Static discharge is 8 kV (air discharge), HF radiation is 10 V/m in the range 80 MHz to 6 GHz. Fast transients are 4 kV, and surge voltages between supply lines are 1 kV, between line and earth 4 kV. Radio frequency interference complies with emission limit class B according to EN 55011. The rated impulse voltage is 4 kV for input/output (pollution degree 3) and 2.5 kV for contacts (pollution degree 2). Creepage and clearance distances are specified according to IEC 60664-1.

Connection and Conductor Fixing
The conductor connection terminals are designed for 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with sleeve DIN 46228-1/-2/-3/-4). Conductor fixing is done via flat terminals with self-lifting connection washers according to IEC/EN 60999-1. The tightening torque is 0.8 Nm. Terminal marking follows EN 50005: A1 (control signal L or DC+), A2 (neutral conductor N or DC-), 13/14 (close contact load), 11/12/14, 21/22/24 (changeover contact load). Quick mounting is done via a DIN rail (IEC/EN 60715). The net weight is 60 g, dimensions are 17.5 mm (width) x 89 mm (height) x 58 mm (depth).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001826
qrcode für Dold 0044709 IK8802.01 AC/DC24V coupling relay