| Technical data |
| Enclosure design | Distribution board |
| Output contacts | 2 C/O contacts |
| Time function(s) | On-delay |
| Width | 17,5 mm |
| Type | IK 7825 |
| Variant |
| Contact equipping | 1 changeover contact delayed |
| Nominal voltage | AC 230 V |
| Time range | 1,5 - 30 s |
The Dold time relay IK7825.81 is a delayed-actuation relay for industrial control applications, designed for a rated voltage of AC 230 V and a frequency of 50 Hz. It features a contact configuration with one delayed changeover contact and is designed for time ranges from 1.5 to 30 seconds. The device is used for time-controlled switching of electrical loads, for example, to delay the start-up of motors, lighting systems, or other consumers, in order to avoid load peaks or optimize operation. The width is 17.5 mm, making it suitable for use in standard installation distributors.
Applications
This time relay is intended for use in industrial and commercial installations where precise time-controlled switching functions are required. It is suitable, for example, for controlling pumps, fans, lighting systems, or machine controls, where delayed activation or deactivation is necessary. Compliance with standard EN 61812-1 ensures standardized and reliable operation. The operating temperature ranges from -20 °C to +45 °C, enabling use in indoor environments under normal operating conditions.
Functions and Equipment in Detail
The relay features a stepless time adjustment in the range of 1.5 to 30 seconds, set via a relative scale with a ratio of 1:20. The repeatability is ≤ 0.5 % + 10 ms, enabling high precision in repeated switching operations. An integrated push-button allows manual actuation of the contact, and the button is depressed when the relay is energized, serving as a visual indication of switching position. The contact configuration includes one delayed changeover contact, rated for a thermal current of 16 A.
Technology Explained Simply
The time delay occurs after the relay is actuated, i.e., after the coil is energized, the contact switches only after the set time has elapsed. The contact reset time is less than 30 ms, enabling a rapid response after de-energization. The rated power consumption is 2.3 VA at AC 230 V. The voltage influence is less than 1 % over the voltage range of 90 to 110 % of the rated voltage, ensuring stable operation with slight fluctuations in supply voltage. The temperature dependence is less than 0.1 % per Kelvin, ensuring reliability during temperature variations in operation.
Compatibility and Accessories
The relay is designed for use in installation distributors and conforms to the housing form for distributors. The terminal connections are designed according to DIN 46228-1/-2/-3/-4 and allow connection of conductors with a cross-section of up to 2.5 mm² solid. The contact materials consist of AgSnO₂, ensuring good electrical conductivity and wear resistance. The electrical life is 12 x 10⁴ switching operations at 500 switching operations per hour and resistive load at AC 230 V, 16 A. The mechanical life exceeds 3 x 10⁶ switching operations.
Mounting and Installation
The device is mounted in standard installation distributors, with the width of 17.5 mm ensuring compatibility with common distributors. Terminal marking is according to EN 50005. The switching capacity is limited by the arc limit curve, which results from the combination of switching voltage and switching current. The maximum switching voltage is AC 250 V. Short-circuit resistance is ensured by a maximum fuse rating of 16 A gG / gL according to IEC/EN 60947-5-1.
Operational Advantages
The high repeatability and low dependence on voltage and temperature ensure reliable and precise switching function. The integrated switching position indication via the push-button facilitates diagnosis and maintenance. The short contact reset time enables a rapid response after de-energization. Compliance with standard EN 61812-1 and approval for continuous operation guarantee safe and long-term use in industrial applications. The protection rating IP 40 for the housing and IP 20 for the terminals protects against contact and foreign objects, with the device intended for use in enclosed distributors.
Additional Technical Specifications
The rated impulse voltage is 4 kV at pollution degree 2, ensuring sufficient insulation strength for use in industrial environments. The overvoltage category III and the insulation test voltage of 2.5 kV for 1 minute ensure electrical safety. EMC requirements according to IEC/EN 61000-4-2 to -6 are met, with radio interference suppression complying with Class B limits according to EN 55011. Vibration resistance is tested with an amplitude of 0.35 mm and a frequency of 10 to 55 Hz according to IEC/EN 60068-2-6. Climatic resistance corresponds to designation 20 / 045 / 04 according to IEC/EN 60068-1. The operating altitude is limited to a maximum of 2000 m above sea level.
Protection Rating and Materials
The housing is made of a thermoplastic with V0 behavior according to UL Subject 94, ensuring good flame resistance. The protection rating IP 40 for the housing and IP 20 for the terminals protects against contact with fingers and ingress of solid foreign objects. The terminals are designed for connection of conductors according to DIN 46228, with a maximum connection cross-section of 2.5 mm² solid. The contact materials consist of AgSnO₂, providing high wear resistance and good electrical conductivity.
Operating Conditions
The device is designed for continuous operation. The operating temperature ranges from -20 °C to +45 °C, while the storage temperature may range from -25 °C to +70 °C. The relative humidity is up to 95 % at 40 °C. The permissible switching frequency is 1000 switching operations per hour. The electrical life depends on the load type and switching current, achieving 12 x 10⁴ switching operations at 16 A and resistive load. The mechanical life exceeds 3 x 10⁶ switching operations.