Further information for Dold 0043825 IK8701.11/008 DC24V relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
16 A
Width
17,5 mm
Type
IK 8701
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 changeover contact
Nominal voltage
DC 24 V
Variant
With protection diode to protect against wrong polarity and recovery diodes to reduce switching spikes. Plus on A2+
The Dold switching relay IK8701.11/008 DC24V is an industrial coupling relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or for controlling loads that are operated via a PLC. The device is designed for a nominal voltage of DC 24 V and features a contact configuration of 1 changeover contact, with a maximum of 2 changeover contacts per device being realizable. The width is 17.5 mm, making it suitable for installation in standard distribution boxes. The housing is designed as an installation distributor, enabling easy mounting in enclosures.
Applications
This relay is specifically designed for use in industrial control systems. It is suitable for switching lamp loads, for example HQ lamps, as well as for actuating PLC systems. As an input coupling relay, it can receive signals from sensors or other control devices and forward them to the PLC. As an output coupling relay, it transmits the control signals from the PLC to the loads to be switched, such as motors, heaters, or lighting. Use in systems with 2-wire initiators is possible, with the permissible residual current being ≤ 3 mA.
Functions and Equipment in Detail
The device features a protective circuit at the coil input, protected by integrated diodes against reverse polarity. Additionally, freewheeling diodes are installed to suppress switching surges when switching inductive loads. The connection polarity is via A2+. The contacts can be manually closed using a hand-operated button on the front. This button also serves as a switching position indicator: when the relay is energized, the button is pushed in; in the de-energized state, it flushes with the front edge. The contacts are gold-plated, which improves contact quality at low loads, although they may be burned off at high switching currents.
Technology Explained Simply
The relay operates with a toggle armature, which actuates the contacts via a plunger. When the excitation voltage drops, the armature is returned to its rest position by a spring. The maximum thermal current rating (Ith) is 16 A, describing the contact load capacity under continuous operation. The contact gap is 6 mm, ensuring a secure separation of the contacts. The switching function is performed by an electromagnetic drive, which pulls the armature and closes the contacts when the nominal voltage is applied. The switching function is certified according to EN 60947-5-1, confirming compliance with standards for electrical switching devices.
Compatibility and Accessories
The relay is designed for use in systems with DC 24 V and can be operated with 2-wire initiators. It is suitable for switching inductive DC loads, for example, at DC 220 V with a time constant of 30 ms. Use with lamp loads, particularly HQ lamps, is possible, with parallel compensation of up to 100 μF being permissible. The contact configuration is fixed at 1 changeover contact, with a maximum of 2 changeover contacts per device. The width of 17.5 mm allows mounting in standard distribution boxes.
Mounting and Installation
The relay is mounted in installation distributor boxes, with the width of 17.5 mm enabling placement in standard rails (DIN rails). The connection terminals are clearly labeled, with the control terminals A1+ and A2+ designated for the DC 24 V voltage. The load terminals are labeled 11, 12, 14, 21, 22, 24, where 11 and 21 are the fixed contacts, 12 and 22 are the movable contacts, and 14 and 24 are the respective switching contacts. Mounting is done by clipping into the rail, with electrical connections made via the terminals.
Advantages in Operation
The relay offers a high thermal current rating of 16 A, ensuring reliable switching performance even at higher loads. The integrated diodes protect against reverse polarity, and the freewheeling diodes reduce switching surges, extending the life of the contacts. The hand-operated button enables manual switching and also serves as a switching position indicator. The construction in accordance with EN 60947-5-1 ensures compliance with relevant safety and functional standards. The width of 17.5 mm allows compact mounting in enclosures, saving space. Use in PLC systems is particularly advantageous due to its function as an input and output coupling relay.