Dold 0043457, EAN: 4030641434571

Dold 0043457 AD8851.19 DC125V toggle relay

Dold 0043457 AD8851.19 DC125V toggle relay

Lieske Part No. 1001731
Mfg Part No 0043457
EAN-Code 4030641434571
Manufacturer Dold
Here only 218,87 EUR
260,46 EUR incl. VAT

Further information for Dold 0043457 AD8851.19 DC125V toggle relay

Technical data
Enclosure designSwitch cabinet
Output contacts max.4 NC contacts, 4 NO contacts
Thermal current Ith max.8 A
Width45 mm
TypeAD 8851
Variant
Contact equipping4 NO contacts, 4 NC contacts
Nominal voltageDC 125 V
The Dold toggle relay AD8851.19 DC125V is a bistable relay designed for use in enclosures, intended for locking control circuits in industrial systems. It features a robust construction with a torsion-resistant mounting frame that supports both toggle armature magnetic systems and the common contact block. The bistable function is achieved through two mutually interlocking magnetic systems, ensuring the relay remains stable even under high mechanical stress. The rated voltage is DC 125 V, and the contact configuration includes 4 closers and 4 openers, enabling flexible use in complex circuits. The width of 45 mm conforms to the standard for enclosure mounting and ensures compact placement in control systems.

Applications
This relay is intended for use in industrial control systems, particularly where secure locking of switching states is required. Typical applications include machine control, plant automation, and safety functions, where defined and reliable switching behavior must be maintained even after power failure or pulse control. The locking function ensures that the last switching state is retained until a new pulse changes the position.

Functions and Features in Detail
Operation is achieved via pulse or continuous excitation of coils A1-A2 or B1-B2. During simultaneous excitation of both systems, the lock is released, and the contact position corresponds to the excitation of coil A1-A2. All contacts are arranged on the same magnetic system, preventing undefined states during simultaneous excitation. A switch lever mounted on the front plate allows manual operation and simultaneously indicates the current magnetic or contact position. This is particularly useful for maintenance, diagnostics, and manual override of switching states.

Technology Explained Simply
The contact position is determined by excitation of coils A1-A2 or B1-B2. The coils can be operated with direct current (DC), with selectable polarity. The response and release time of the contacts is less than 40 ms each, enabling rapid reaction to control signals. The thermal current Ith is maximum 8 A, applicable when using two contacts. With three contacts, the value reduces to 5 A, and with four contacts, to 4 A. Switching capacity according to AC 15 is 3 A for closers and 1 A for openers at AC 230 V, as per IEC/EN 60947-5-1.

Compatibility and Accessories
The relay is specified according to IEC/EN 61810-1 and designed for use in enclosures. It is compatible with control systems using a DC 125 V coil supply. The contact configuration with 4 closer and 4 opener contacts enables a wide range of switching combinations. Optional variants with freewheeling diodes are available to suppress switching surges, but are not part of this version.

Mounting and Installation
The relay is mounted in enclosures and requires installation in a suitable enclosure with sufficient space for the width of 45 mm. Connections are made via the designated terminals, with contact assignment according to the wiring diagrams in the datasheet. The operating temperature ranges from -20 °C to +45 °C, and the maximum operating altitude is 2000 m above sea level.

Operational Advantages
The bistable function ensures reliable storage of the switching state, even during power failure. The mechanical robustness and torsion-resistant frame ensure a long service life even under harsh operating conditions. Manual operation via the switch lever enables easy diagnostics and maintenance. The electrical service life is at least 100,000 switching operations at 1 A and AC 230 V, with an allowable switching frequency of 3000 operations per hour. The mechanical service life is 50 million switching operations, ensuring high reliability over long operating periods. Short-circuit resistance is ensured with a maximum fuse rating of 10 A gG/gL according to IEC/EN 60947-5-1.

Approvals and Markings
The device complies with standards IEC/EN 61810-1 and IEC/EN 60947-5-1. EMC requirements are met according to IEC/EN 61000-4-2 (electrostatic discharge), IEC/EN 61000-4-3 (RF radiation), IEC/EN 61000-4-4 (fast transients), and IEC/EN 61000-4-5 (overvoltages). The insulation level is 4 kV at pollution degree 2 according to IEC 60664-1.

Operating Conditions
The relay is designed for continuous operation. The operating temperature ranges from -20 °C to +45 °C, and the storage temperature is also between -20 °C and +45 °C. The maximum operating altitude is 2000 m above sea level. The allowable voltage variation is within 0.8 to 1.1 times the rated voltage.

Switching Behavior and Service Life
The response and release time of the contacts is less than 40 ms each. The electrical service life is at least 100,000 switching operations at 1 A and AC 230 V, reaching 300,000 switching operations at 3000 operations per hour and 50 % of switching capacity. At 100 % switching capacity and 1000 operations per hour, the service life is 500,000 switching operations. The mechanical service life is 50 million switching operations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001731
qrcode für Dold 0043457 AD8851.19 DC125V toggle relay