Further information for Dold 0043131 IK8701.12 AC/DC24V relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
16 A
Width
17,5 mm
Type
IK 8701
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC/DC 24 V
The Dold switching relay IK8701.12 AC/DC24V is an industrial relay for use in control and automation technology. It serves as an input or output coupling relay, for example, to control PLC systems or to switch loads controlled via a PLC. The device is designed for a nominal voltage of AC/DC 24 V and features a contact configuration with 2 changeover contacts. The width is 17.5 mm, making it suitable for use in standard installation distributors. The relay complies with the standard EN 60947-5-1 and is thus approved for industrial applications in control technology.
Applications
This relay is specifically designed for use in industrial control systems. It can be used as an input coupling relay to forward signals from sensors or other devices to a PLC. As an output coupling relay, it switches loads controlled via a PLC, such as lamps, motors, or other electrical consumers. The contact configuration with 2 changeover contacts allows for flexible switching arrangements, and the contacts can also be manually operated via a button on the front. This button also serves as a switching position indicator: when the relay is energized, the button is pushed in; in the de-energized state, it closes flush with the front edge.
Functions and Equipment in Detail
The relay features an initiator actuation, enabling operation with 2-wire initiators. The permissible residual current is a maximum of 3 mA. A protective circuit is integrated at the coil input to protect against overvoltage. The contacts are designed to operate stably even under high thermal loads; the maximum thermal current Ith is 16 A. The contact arrangement allows switching of lamp loads, with parallel compensation for HQ lamps up to 100 μF supported. The device is also suitable for switching large inductive DC loads (e.g. DC 220 V, L/R = 30 ms). For DC devices, a freewheeling diode is integrated, serving as reverse polarity protection and suppressing switching surges. Connection polarity is via A2+.
Technology Explained Simply
The relay operates with a toggle armature that actuates the contacts via a plunger. When the excitation voltage drops, the armature is returned to its resting position by a spring. The contacts can thus be operated both electrically and manually via the front button. The switching position indicator is shown by the button's position: pushed in indicates closed contacts, flush closure indicates de-energized state. The protective circuit at the coil input protects the device against transient voltage spikes that may occur during switching operations. The freewheeling diode in DC devices prevents voltage spikes when switching off inductive loads.
Compatibility and Accessories
The relay is designed for use in standard installation distributors and fits into widths of 17.5 mm. It is compatible with PLC systems and can serve as an interface between sensors, actuators, and control devices. The contact configuration with 2 changeover contacts enables use in various switching arrangements. Actuation via 2-wire initiators expands its applications in safety and alarm systems. The integrated protective circuit and freewheeling diode for DC devices increase the reliability and service life of the relay.
Mounting and Installation
The relay is installed in an installation distributor, with the width of 17.5 mm enabling mounting in standard distributor enclosures. The connection terminals are clearly labeled: A1/A2 for the control signal, with polarity A1+/A2 or A1/A2+ possible for AC/DC. The output contacts are configured as changeover contacts (11,12,14; 21,22,24). Mounting is done by snapping into the distributor rail, with electrical connections made via the terminals. The manual operation button allows testing of the switching function without electrical supply.
Advantages in Operation
The relay offers high thermal load capacity with a maximum thermal current of 16 A, making it suitable for demanding industrial applications. The integrated protective circuit at the coil input increases operational safety. Manual operation and switching position indication simplify maintenance and troubleshooting. Compatibility with 2-wire initiators expands applications in safety and alarm systems. The freewheeling diode for DC devices protects against switching surges and extends the relay's service life. The width of 17.5 mm allows compact mounting in standard distributor enclosures.