Dold 0041706, EAN: 4030641417062

Dold 0041706 UP5862 test and alarm combination

Dold 0041706 UP5862 test and alarm combination

Lieske Part No. 1002096
Mfg Part No 0041706
EAN-Code 4030641417062
Manufacturer Dold
Here only 263,48 EUR
313,54 EUR incl. VAT

Further information for Dold 0041706 UP5862 test and alarm combination

Technical data
Width80 mm
TypeUP 5862
The UP5862 test and alarm combination from Dold is an accessory device for insulation monitors, specifically developed for monitoring insulation in rooms used for medical purposes according to DIN VDE 0100-710. The device serves as a visual and acoustic signal indicator and is installed in standard flush-mounted boxes to meet operational safety requirements in medical facilities. It is designed for use in IT networks requiring high insulation quality and supports continuous monitoring of electrical insulation in the network.

Applications
The UP5862 is used in medical facilities where electrical safety is of high importance, for example in operating rooms, intensive care units, or treatment rooms. It is intended for connection to insulation monitors such as the IP 5880/711 or IS 9112/712, which monitor insulation in the network. The device enables rapid detection of earth faults and signals this condition via visual and acoustic indicators, allowing timely action to be taken.

Functions and Equipment in Detail
The device features an internal electrical signal generator in the form of a horn, which is activated in the event of an earth fault. A reset button allows manual deactivation of the horn without resolving the fault condition. A test button is provided for checking the functionality of the connected device. Two LEDs serve as indicators: a green LED indicates operational readiness, while a yellow LED indicates an earth fault. These visual cues assist personnel in quickly identifying faults.

Technology Explained Simply
The UP5862 operates with a rated voltage of AC 24 V and a voltage range of 0.8 to 1.1 times the rated voltage. The rated consumption is 0.5 VA at a rated frequency of 50/60 Hz. The device is designed for continuous operation and can be operated in a temperature range from -5 °C to +55 °C. The operating altitude is limited to below 2000 m. The protection rating IP 30 protects against contact with moving parts and against solid foreign objects larger than 2.5 mm. EMC compliance includes protection against static discharge (8 kV), HF radiation (12 V/m), fast transients (2 kV), surge voltage (1 kV), and HF conducted disturbances (10 V). Radio frequency interference suppression complies with Class B limits according to EN 55011.

Compatibility and Accessories
The test and alarm combination is specifically designed for use with insulation monitors IP 5880/711 (article number 0057875) and IS 9112/712 (article number 0057877). The connection terminals comply with standard EN 50005, and the conductor connections are designed according to DIN 46228-1/-2/-3. Maximum cable lengths are 500 m for a conductor cross-section of 0.5 mm² and 1000 m for 1.5 mm². Connection cross-sections include 1 x 4 mm² solid, 1 x 2.5 mm² stranded wire with ferrule and plastic sleeve, or 2 x 1.5 mm² or 2 x 2.5 mm² stranded wire with ferrule. The stripping length for conductors is 7.0 mm, and the terminals are designed as box terminals with wire protection. The tightening torque is 0.4 Nm.

Mounting and Installation
The UP5862 is designed for installation in standard flush-mounted boxes. The device dimensions are 80 mm width, 80 mm height, and 35 mm depth. The mounting width is 80 mm, matching the standard width for flush-mounted devices. Installation is carried out in the usual manner in electrical distributions, with the connection terminals wired according to the specifications in the data sheet. Terminal designations PT1, PT2, X1, X2, and X5 are assigned to the functions test button, reset button, and fault alarm inputs.

Advantages in Operation
The combination of visual and acoustic signaling enables rapid response to insulation faults. The integrated test button allows regular functionality checks, increasing system reliability. The clear indication via LEDs and horn ensures high visibility of faults, especially in environments with high noise levels. Compatibility with established insulation monitors and compliance with DIN VDE 0100-710 ensure suitability for medical applications. The robust construction with vibration resistance and climate resistance (05 / 055 / 04) ensures reliable operation under industrial conditions. The device has a net weight of 100 g and is therefore lightweight and compact.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002096
qrcode für Dold 0041706 UP5862 test and alarm combination