Further information for Dold 0041412 coupling relay CA3056.01 AC/DC24V
Technical data
Enclosure design
Switch cabinet
Output contacts max.
1 NC contact, 1 NO contact
Thermal current Ith max.
5 A
Width
11,5 mm
Type
CA 3056
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 NO contact
Nominal voltage
AC/DC 24 V
The CA3056.01 AC/DC24V coupling relay from Dold is an industrial relay for use in enclosures, serving as an interface between control and power circuits. It enables contact multiplication and is designed for operation with a nominal voltage of AC/DC 24 V. The width is 11.5 mm, allowing compact mounting in standard enclosure modules. The device is designed for continuous operation and complies with the standard IEC/EN 60947-5-1. The contact configuration includes one normally closed contact, with the maximum contact arrangement comprising one normally closed and one normally open contact. The contacts are rated for switching operations with an output nominal voltage of AC 250 V.
Applications
This relay is used in industrial control systems where galvanic isolation between control and power circuits is required. It serves for potential separation and signal transmission between different electrical systems. Applications are particularly in installations requiring safe isolation according to IEC/EN 61140 and IEC/EN 60947-1, with a rated impulse voltage between input and output of 6 kV. The operating temperature ranges from -25 °C to +60 °C, and the storage temperature is also within the range of -25 °C to +60 °C.
Functions and Features in Detail
The relay features an LED indicator that lights up when energized, visually signaling the operating status. The initiator actuation is integrated, enabling direct control via external signals. The coil input protection circuit, which may be equipped with a MOV (Metal-Oxide Varistor), protects the device against transient voltage surges and increases surge voltage resistance. The contacts are rated for a thermal current Ith of up to 5 A.
Technology Explained Simply
The switching function is achieved by energizing the coil with the nominal voltage AC/DC 24 V. When current flows, the armature moves and the normally closed contact closes. The pickup time is less than 10 ms, and the release time is less than 20 ms. The mechanical life expectancy exceeds 30 million switching operations, while the electrical life expectancy at AC 15 and 3 A/AC 230 V exceeds 800,000 switching operations. The switching capacity according to AC 15 is 3 A/AC 230 V for the normally closed contact and 1 A/AC 230 V for the normally open contact. At DC 13, the switching capacity is 1 A/DC 24 V for both contacts. The short-circuit withstand capability is defined by a maximum fuse rating of 6 A gG/gL.
Compatibility and Accessories
The relay is available in various variants with different contact configurations, including 1 normally closed, 1 normally open, 1 changeover, 2 changeover, or 2 normally closed contacts. The CA3056.01 variant is specifically designed for use with one normally closed contact. The contacts can optionally be coated with 5 μm of gold to enable switching of low loads in the range of 2 to 60 V, 1 to 300 mA, and 10 mW to 12 W. After switching loads exceeding this range, the gold coating is burned off, rendering the device unsuitable for low-load applications.
Mounting and Installation
Mounting is performed in enclosures with a width of 11.5 mm. The terminal connections are designed for wiring. The operating altitude is limited to a maximum of 2000 m above sea level. The ambient temperature during operation must be within the range of -25 °C to +60 °C. The enclosure protection rating is IP 40, and the terminal connections have an IP 20 rating.
Operational Advantages
The relay provides safe isolation between control and power circuits, enhancing safety in industrial installations. The integrated LED indicator allows for quick status monitoring. The protection circuit at the coil input increases reliability against transient voltage disturbances. The compact design and high service life make the device suitable for long-term industrial applications. The switching frequency can reach up to 20 switching operations per second, sufficient for dynamic control tasks.