Further information for Dold 0041408 CA3056.05 AC/DC24V coupling relay
Technical data
Enclosure design
Switch cabinet
Output contacts max.
1 NC contact, 1 NO contact
Thermal current Ith max.
5 A
Width
11,5 mm
Type
CA 3056
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 NC contact
Nominal voltage
AC/DC 24 V
The coupling relay CA3056.05 AC/DC24V from Dold is an industrial relay for contact multiplication and serves as an interface between control and power circuits. It is specifically designed for use in enclosures and features a width of 11.5 mm, enabling compact mounting in standard control panels. The rated voltage is AC/DC 24 V, allowing the device to operate with both alternating and direct current. The contact configuration includes one normally closed (1 NC) contact, with the maximum contact arrangement, according to the manufacturer, comprising one normally open and one normally closed contact. The output contacts are rated for a thermal current load of up to 5 A, enabling use in applications with moderate loads.
Applications
This relay is particularly suitable for potential isolation and signal transmission in industrial control systems. It is commonly used in installations requiring galvanic separation between control and load circuits, such as in automation technology, machine building, or process control. The secure isolation in accordance with IEC/EN 61140 and IEC/EN 60947-1, with a rated impulse voltage of 6 kV and pollution degree 2, ensures high electrical insulation between input and output circuits.
Functions and Equipment in Detail
The device features an LED indicator that lights up when the relay is energized, visually signaling its operating status. The coil is equipped with protective circuitry at the input, providing enhanced surge voltage resistance. Optionally, the relay can be fitted with an MOV (Metal Oxide Varistor) at the input, increasing immunity against transient voltage spikes. The contact configuration is suitable for switching small loads, with contacts optionally coated with a 5 μm gold layer to enable switching of loads in the range of 2 to 60 V, 1 to 300 mA, and 10 mW to 12 W. At higher switching currents, the gold coating is burned off, rendering the device unsuitable for small-load applications thereafter.
Technology Explained Simply
The switching function is achieved by energizing the coil with the rated voltage AC/DC 24 V. When voltage is applied, the contact (normally closed) closes, activating the output circuit. The pickup time is less than 10 ms, and the drop-out time is less than 20 ms, enabling rapid response to control signals. The switching capacity according to AC 15 is 1 A at AC 230 V for the normally closed contact, while the normally open contact can switch up to 3 A. For direct current (DC 13), the switching capacity is 1 A at DC 24 V. The mechanical life expectancy exceeds 30 million switching operations, and the electrical life expectancy exceeds 800,000 switching operations at 3 A and AC 230 V.
Compatibility and Accessories
The relay is compatible with various control systems and can be used in combination with other coupling relays from the CA 3056, CB 3056, and CC 3056 series. The variants differ in contact configuration (e.g., 1 changeover, 2 normally open) and equipment (MOV, gold coating, secure isolation). The devices comply with IEC/EN 60947-5-1 standards and meet requirements for use in industrial installations. The rated insulation voltage is 300 V, and overvoltage category III is typical for industrial applications.
Mounting and Installation
The relay is mounted in enclosures and designed for continuous operation. The operating temperature range is from -25 °C to +60 °C, and the storage temperature range is also from -25 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level. The housing design is intended for use in enclosures, with the housing made of thermoplastic material with VO behavior according to UL 94. The housing protection rating is IP 40, and the terminal connection protection rating is IP 20.
Advantages in Operation
The relay provides a reliable and low-maintenance switching function with high service life. The LED indicator enables easy status monitoring. The integrated protective circuitry at the input increases immunity to interference, and the secure isolation ensures electrical safety. The compact design and standard width of 11.5 mm facilitate integration into existing control systems. Compliance with IEC/EN 60947-5-1 standards ensures suitability for industrial environments with high requirements for safety and reliability.