Dold 0041264, EAN: 4030641412647

Dold 0041264 BO5988.61/024 DC24V+AC24V emergency stop module

Dold 0041264 BO5988.61/024 DC24V+AC24V emergency stop module

Lieske Part No. 1001997
Mfg Part No 0041264
EAN-Code 4030641412647
Manufacturer Dold
Here only 628,79 EUR
748,26 EUR incl. VAT

Further information for Dold 0041264 BO5988.61/024 DC24V+AC24V emergency stop module

Technical data
1- / 2-channel1, 2
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-14/e
ConnectionPluggable screw terminals
Output contacts max.1 NC contact, 6 NO contacts
SIL CL acc. to IEC/EN 620613
SIL acc. to IEC/EN 620613
Thermal current Ith max.10 A
Width100 mm
TypeBO 5988
Cross fault detectionYes
Variant
Contact equipping6 NO contacts, 1 NC contact as signal contact
Nominal voltageDC 24 V + AC 24 V
Time rangewithout
Approvals and MarkingsTÜV, UKCA
VariantWithout time delay. Dual voltage model
The Dold BO5988.61/024 DC24V+AC24V is a safety relay module of the BO 5988 series, specifically designed for use in emergency stop circuits and monitoring of sliding safety grilles in industrial automation. It enables the safe shutdown of machines and systems in case of hazardous situations, ensuring protection for personnel and equipment. The device is designed as a dual-voltage variant, supporting a nominal voltage of both DC 24 V and AC 24 V, allowing flexible integration into existing control systems. The width is 100 mm, making it suitable for standard control panels.

Applications
This module is used in systems requiring safe shutdown, particularly in machines with sliding safety grilles, where the position of the grille must be monitored. It is intended for use in emergency stop circuits, where operational safety is ensured through redundant monitoring loops. Applications are in industrial environments where compliance with safety standards such as EN ISO 13849-1 and IEC/EN 62061 is required.

Functions and Equipment in Detail
The device features contact configuration with up to 6 NO contacts and 1 NC contact, where the NC contact serves as an alarm contact. The NO contacts can be used for controlling auxiliary functions or signaling. The 1- or 2-channel wiring allows flexible configuration according to requirements. Integrated cross-connection detection at the single-button switch detects faults in the control circuit, increasing the reliability of the circuit. Additionally, a feedback circuit X1-X2 is provided for monitoring external contactors. The connection technology uses removable screw terminals, suitable for stranded wires with 2 x 1.5 mm² with sleeve and plastic collar DIN 46 228-1/-2/-3/-4 or 2 x 2.5 mm² with sleeve DIN 46 228-1/-2/-3.

Technology Explained Simply
The safety relay operates on the principle of redundant monitoring. When the emergency stop button is activated, the control circuit is interrupted, causing the output contacts to switch and safely shutting down the machine. The integrated cross-connection detection checks whether the button is functioning correctly and prevents false alarms due to accidental connections. LED indicators for channel 1/2 and power supply signal the operating status and facilitate diagnosis. The integrated short-circuit and overvoltage protection safeguards the device against electrical disturbances. The maximum thermal current load is 10 A, defining the contact load capacity.

Compatibility and Accessories
The module is designed for use in safety systems complying with standards EN ISO 13849-1 (Category 4, Performance Level e) and IEC/EN 62061 (SIL CL 3, SIL 3). It is designed as a dual-voltage variant, allowing operation with both direct and alternating voltage. The terminals are removable, enabling easy installation and maintenance.

Mounting and Installation
Mounting is done in standard control panels with a width of 100 mm. The removable screw terminals simplify wiring. The terminal assignment is described in the datasheet, with terminals designated for supply voltage, control, and output contacts. Installation must follow the manufacturer’s technical instructions, ensuring correct wiring of safety functions.

Operational Advantages
The module provides high safety integrity by complying with EN ISO 13849-1 and IEC/EN 62061 standards. The integrated cross-connection detection and feedback circuit increase circuit reliability. LED indicators allow quick diagnosis of operating status. The dual-voltage variant enables flexible integration into existing systems. Removable terminals simplify maintenance and replacement.

Approvals and Markings
The device carries TÜV and UKCA approvals, as well as UL-Recognized approval, confirming compliance with European and American safety requirements. Marking is done according to applicable standards for safety devices.

Safety Functions
The safety functions include redundant monitoring of the control circuit, cross-connection detection at the single-button switch, and a feedback circuit for monitoring external contactors. The output contacts are designed to safely switch in case of control failure. LED indicators signal the operating status and support maintenance.

Operating Conditions
The device is designed for use in industrial environments. The operating voltage is DC 24 V and AC 24 V. The maximum thermal current load is 10 A. The width of 100 mm allows mounting in standard control panels. The terminals are designed for wires up to 2.5 mm².
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001997
qrcode für Dold 0041264 BO5988.61/024 DC24V+AC24V emergency stop module