Further information for Dold 0040371 IK3076.11/004 AC/DC42V coupling relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
10 A
Width
17,5 mm
Type
IK 3076
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 changeover contact
Nominal voltage
AC/DC 42 V
Variant
For switching low loads
The coupling relay IK3076.11/004 AC/DC42V from Dold serves as an interface between control and power circuits and enables contact multiplication in industrial installations. It is specifically designed for use in installation and industrial distributors according to DIN 43880 and is particularly suitable for applications where potential isolation is required. The variant is designed for switching small loads and features a contact configuration with one changeover contact. The rated voltage is AC/DC 42 V, with the voltage range lying between 0.8 and 1.1 times the rated voltage, and between 0.9 and 1.25 times the rated voltage for battery operation. The width of 17.5 mm allows for compact mounting in standard distributor enclosures.
Applications
This device is intended for use in industrial and railway applications where a secure separation between control and power circuits is necessary. It is frequently used in control systems, automation systems, and safety circuits to transmit signals from a control level to multiple loads. The configuration with a changeover contact ensures secure potential isolation in accordance with IEC/EN 61140 and IEC/EN 60947-1, which is relevant for installations with increased safety requirements.
Functions and Equipment in Detail
The coupling relay features an LED indicator that lights green when the relay is energized, enabling visual monitoring of the operating status. The initiator actuation allows for safe and reliable activation of the relay. The protective circuitry at the coil input protects the device against voltage surges and transient overvoltages, increasing its service life and improving reliability in operation. The maximum number of output contacts is two changeover contacts, although the variant described here has only one changeover contact.
Technology Explained Simply
The thermal current Ith is up to 10 A, indicating the maximum continuous load capacity of the contacts. The pickup time is under 10 ms, and the drop-out time is under 20 ms, indicating fast responsiveness. The switching capacity is defined according to AC 15 and DC 13: as a make contact, it can switch 3 A at AC 230 V and 1 A at DC 24 V; as a break contact, 1 A at AC 230 V and 1 A at DC 24 V. The electrical life is 100,000 switching operations at 3 A and AC 230 V, while the mechanical life exceeds 30 million switching operations. The short-circuit withstand requires a maximum fuse rating of 10 A gG/gL.
Compatibility and Accessories
The device is designed for use in installation and industrial distributors according to DIN 43880 and can be mounted either on a DIN rail (IEC/EN 60715) or via screw mounting (M4, pitch 90 mm). The connection terminals are located at the bottom and allow connection with conductors of cross-section 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule DIN 46228-1/-2/-3/-4). The stripping length is 10 mm, and the tightening torque for the terminals is 0.8 Nm.
Mounting and Installation
Mounting is done either on a DIN rail using a snap-in fastening or via screw mounting with M4 screws. The depth is 59 mm, allowing installation in standard distributor enclosures. The terminals are designed for connection with solid and stranded conductors, with the use of ferrules according to DIN 46228 recommended. Device mounting is achieved via a pull-out slider, ensuring secure installation.
Advantages in Operation
The coupling relay complies with standards IEC/EN 60947-5-1 and IEC/EN 61810-1, ensuring reliability and safety in operation. The integrated input protective circuitry protects against transient voltage surges. The LED indicator enables quick status monitoring. The high mechanical life and short pickup time make the device suitable for demanding industrial applications. The mounting options and compact design facilitate integration into existing systems.
Protection Rating and Environmental Conditions
The housing has a protection rating of IP 40, protecting against finger contact and solid objects. The terminals are protected to IP 20. The device is designed for operating temperatures from -25 °C to +60 °C, with storage temperatures from -40 °C to +80 °C. The operating altitude is limited to a maximum of 2000 m. The creepage and clearance distances comply with the requirements of IEC 60664-1, with a rated impulse voltage of 6 kV for input and output in the IK3076.11 variant. EMC requirements are met according to IEC/EN 61000-4-2 to -4-6, including radio frequency interference suppression according to EN 55011, Class B. The vibration resistance is 0.35 mm amplitude at frequencies from 10 to 55 Hz, and the climatic resistance corresponds to 25/060/04 according to IEC/EN 60068-1.
Materials and Construction
The housing is made of thermoplastic with V0 behavior according to UL Subject 94, indicating a high flame retardant class. The terminals are flat terminals with self-lifting connection washers, enabling secure and easy connections. Terminal marking follows EN 50005, with A1 and A2 representing the input connections, and 11, 12, 14 representing the contacts of the first changeover contact.
Operating Conditions
The device is designed for continuous operation. The rated frequency is 50/60 Hz, with a frequency range of ±5 %. The rated consumption is 0.5 W at DC 24 V and 0.8 VA at AC 230 V. The permissible switching frequency is 6000 switching operations per hour. The operating altitude is limited to 2000 m. The storage temperature is from -40 °C to +80 °C.
Approvals and Standards
The device complies with standards IEC/EN 60947-5-1, IEC/EN 61810-1, IEC/EN 61140, IEC/EN 60947-1, IEC/EN 60529, IEC/EN 60664-1, IEC/EN 60068-2-6, IEC/EN 60068-1, IEC/EN 61000-4-2 to -4-6, EN 55011, UL Subject 94, DIN 43880, EN 50005, IEC/EN 60715, IEC/EN 60999-1, DIN 46228-1/-2/-3/-4.
Applications
The coupling relay is used in control systems, automation systems, safety circuits, and in railway technology. It serves for contact multiplication and potential isolation between control and power circuits. Typical use is in industrial installations, machine controls, and in the railway industry.