Further information for Dold 0039937 CB3056.11 coupling relay 220-240V
Technical data
Enclosure design
Switch cabinet
Output contacts max.
1 C/O contact, 2 NO contacts
Thermal current Ith max.
5 A
Width
11,5 mm
Type
CB 3056
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 changeover contact
Nominal voltage
AC 220 - 240 V
The CB3056.11 coupling relay from Dold is an industrial component for contact multiplication and serves as an interface between control and power circuits in electrical systems. It is designed for use in enclosures and features a width of 11.5 mm, making it suitable for standard control panels. The rated voltage is AC 220–240 V at a rated frequency of 50/60 Hz, with operation guaranteed within a voltage range of 80 to 110 % of the rated voltage. The device is designed for continuous operation and can be used at ambient temperatures from -25 °C to +60 °C.
Applications
This relay is suitable for applications requiring electrical isolation between control and load circuits. It is commonly used in automation technology, machine and plant engineering, as well as in building automation. The safe isolation in accordance with IEC/EN 61140 and IEC/EN 60947-1, with a rated impulse voltage of 6 kV and pollution degree 2, enables use in environments with increased safety requirements. The contact configuration with a changeover contact (1 C/O) allows flexible switching arrangements, with the maximum contact configuration capable of including up to two normally closed contacts.
Functions and Equipment in Detail
The relay features an LED indicator that lights up when energized, visually signaling the operating status. The contacts are standardly coated with silver-nickel (AgNi), with a variant available featuring a 5 μm gold plating (Au) for switching low loads. However, this gold plating is not designed for continuous operation at high switching currents, as it may burn off under higher loads. The maximum switching capacity is 3 A / AC 230 V for AC 15 (normally closed) and 1 A / DC 24 V for DC 13 (normally closed). The electrical life expectancy exceeds 800,000 switching operations at 3 A and AC 230 V, while the mechanical life expectancy exceeds 30 million switching operations.
Technology Explained Simply
The relay coil is connected to the operating voltage via terminals A1 and A2. The output contacts (11, 12, 13, 14) enable the connection between control and load circuits. The protective circuitry at the coil input, consisting of an MOV (Metal-Oxide Varistor), protects the device against transient voltage surges and increases its surge voltage resistance. The initiator actuation enables safe and reliable operation of the relay. The rated insulation voltage is 300 V, and the overvoltage category is III, indicating suitability for use in industrial installations.
Compatibility and Accessories
The relay is compatible with other models in the CB 3056 series, particularly variants with different contact configurations (e.g., 2 normally closed contacts) or additional protective functions (MOV). It can be mounted in enclosures with standard modular construction. The connection terminals are designed for secure connections, and the maximum short-circuit withstand capacity is 6 A gG / gL.
Mounting and Installation
Mounting is performed in enclosures using screw fastening. The width of 11.5 mm corresponds to the standard for modular relays. The terminals are clearly labeled (A1, A2, 11, 12, 13, 14), ensuring unambiguous assignment of wiring. The operating altitude is limited to a maximum of 2000 m above sea level.
Operational Advantages
The relay offers high switching capacity with low energy consumption (rated consumption AC 230 V: 0.8 VA). The LED indicator facilitates diagnosis and maintenance. The safe isolation and protective circuitry enhance operational safety. The long service life and high switching frequency (up to 20 switching operations per second) make it suitable for continuously loaded applications. Compliance with the standard IEC/EN 60947-5-1 ensures reliability and interoperability in industrial control systems.
Protection Rating and Environmental Conditions
The housing has a protection rating of IP 40, providing dust and touch protection against solid foreign objects up to 1 mm in diameter. The terminals are protected to IP 20, offering touch protection against finger sizes up to 12 mm. The operating temperature range is from -25 °C to +60 °C, and the storage temperature range matches the operating temperature range. The maximum operating altitude is 2000 m above sea level.