Dold 0039796, EAN: 4030641397968

Dold 0039796 CB3056.02 AC/DC110V coupling relay

Dold 0039796 CB3056.02 AC/DC110V coupling relay

Lieske Part No. 1001779
Mfg Part No 0039796
EAN-Code 4030641397968
Manufacturer Dold
Here only 73,61 EUR
87,60 EUR incl. VAT

Further information for Dold 0039796 CB3056.02 AC/DC110V coupling relay

Technical data
Enclosure designSwitch cabinet
Output contacts max.1 C/O contact, 2 NO contacts
Thermal current Ith max.5 A
Width11,5 mm
TypeCB 3056
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping2 NO contacts
Nominal voltageAC/DC 110 V
The CB3056.02 AC/DC110V coupling relay from Dold is an industrial switching component for contact multiplication and serves as an interface between control and power circuits. It is designed for use in enclosures and enables the control of multiple loads from a single signal. The width of 11.5 mm makes it compatible with standard control panels and allows for dense mounting. The device is rated for a nominal voltage of AC/DC 110 V and features two normally closed contacts as standard, with a maximum contact configuration of up to two normally closed contacts or one changeover contact. The contacts are rated for operation with an output nominal voltage of AC 250 V.

Applications
This relay is suitable for applications in industrial automation where galvanic isolation between control and load circuits is required. It is commonly used in control systems, drive technology, and safety systems where switching small loads or signal amplification is necessary. The secure isolation in accordance with IEC/EN 61140 and IEC/EN 60947-1, with a rated impulse withstand voltage of 6 kV and pollution degree 2, ensures high electrical insulation between input and output. This is particularly important in systems operating with different potentials.

Functions and Features in Detail
The relay includes an LED indicator that lights up when energized, visually signaling the operating status. The initiator actuation enables a safe and reliable switching function. A protective circuit is integrated at the coil input, featuring a MOV (Metal Oxide Varistor) to provide higher surge voltage resistance and protect the device against transient overvoltages. The contacts are rated for a thermal current Ith of up to 5 A, defining the load capacity under continuous operation.

Technology Explained Simply
The switching function is achieved by energizing the coil with the nominal voltage AC/DC 110 V, which causes the contacts to switch. The pickup time is less than 10 ms, and the drop-out time is less than 20 ms, enabling a fast response to control signals. The switching capacity according to AC 15 is 3 A at AC 230 V for normally closed contacts and 1 A for normally open contacts. For direct current (DC 13), the switching capacity is 1 A at DC 24 V. The mechanical life exceeds 30 million switching operations, while the electrical life at 3 A and AC 230 V is over 800,000 switching operations. The permissible switching frequency is 20 operations per second.

Compatibility and Accessories
The relay complies with IEC/EN 60947-5-1 and can be used in systems requiring this standard. It is designed for operation in a temperature range from -25 °C to +60 °C and can be used up to an operating altitude of 2000 m. The rated insulation voltage is 300 V, and the overvoltage category is III. The enclosure protection rating corresponds to IP 40, and the terminal connection protection rating is IP 20. The contacts are standardly coated with AgNi 10; a variant with 5 μm Au coating is available for switching small loads (2–60 V, 1–300 mA) — however, not for this variant.

Mounting and Installation
The relay is mounted in enclosures and is designed for installation on a DIN rail or in a control box. The terminal connections allow for secure and reliable connections. The operating voltage is connected to terminals A1 and A2, and the output contacts (here: 2 normally closed contacts) are connected to the loads. The LED indicator shows the operating status. Mounting requires no additional tools, as the terminals can be wired directly.

Operational Advantages
The relay offers high reliability due to the integrated protective circuit and robust construction. The LED indicator simplifies diagnostics during operation. Galvanic isolation ensures safe signal transmission, especially in systems with different potentials. The narrow width of 11.5 mm allows for compact installation in existing enclosures. Compliance with IEC/EN 60947-5-1 ensures adherence to safety and quality standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001779
qrcode für Dold 0039796 CB3056.02 AC/DC110V coupling relay