Dold 0039705, EAN: 4030641397050

Dold 0039705 BA7924.21 AC230V 0.3-3S delay module

Dold 0039705 BA7924.21 AC230V 0.3-3S delay module

Lieske Part No. 1153832
Mfg Part No 0039705
EAN-Code 4030641397050
Manufacturer Dold
Here only 135,57 EUR
161,33 EUR incl. VAT

Further information for Dold 0039705 BA7924.21 AC230V 0.3-3S delay module

Technical data
1- / 2-channel1
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-13/d
ConnectionScrew terminals
Output contacts max.1 NC contact, 1 NO contact
SIL CL acc. to IEC/EN 620612
SIL acc. to IEC/EN 620612
Thermal current Ith max.8 A
Time delay max.30 s
Width45 mm
TypeBA 7924
Variant
Contact equipping1 NC contact, 1 NO contact
Nominal voltageAC 230 V
Time range0,3 - 3 s
Approvals and MarkingsTÜV, CCC
Variant1 timing circuit, adjustable time
The Dold delay module BA7924.21 AC230V 0,3-3S is an industrial safety relay module for implementing delayed shutdowns in control and protection systems. It serves as a component in safety-critical installations, where a controlled, time-delayed response to input signals is required, for example in machine control or emergency shutdowns. The device is designed for use in safety applications and complies with the requirements of standards EN ISO 13849-1 and IEC/EN 62061. It features a drop-out delayed function, in which the output does not return immediately after the input signal is switched off, but after an adjustable delay of 0.3 to 3 seconds. The maximum time delay is 30 seconds, although the current variant is fixed to the range of 0.3 to 3 seconds. The rated voltage is AC 230 V, and the module is connected via screw terminals.

Applications

The module is intended for use in industrial control systems and safety installations, particularly in systems designed according to EN ISO 13849-1 up to Category 3 and Performance Level d. It can be used in conjunction with suitable switching devices or control systems to implement safety-relevant functions such as emergency shutdowns, protection functions, or time-controlled shutdown processes. The forced-guided contacts ensure a secure switching function, even in the event of mechanical faults. The switching position indicator allows for visual verification of the current state of the output contacts.

Functions and Equipment in Detail

The device features a contact configuration with one normally open (NO) and one normally closed (NC) contact, both implemented as forced-guided contacts. This design ensures that the contacts are mechanically linked, thereby minimizing the risk of malfunction due to mechanical defects. The connection technology is via screw terminals, which enable a secure and durable connection. The maximum thermal current rating (Ith) is 8 A, defining the contact load capacity for operation in industrial environments. The module width is 45 mm, allowing installation in standard 35 mm control panels.

Technology Explained Simply

The drop-out delayed function means that the output signal is switched off not immediately, but after a pre-set delay time following the deactivation of the input signal. This is necessary, for example, to safely shut down motors or other drives without them stopping abruptly. The time delay in the BA7924.21 variant is fixed to the range of 0.3 to 3 seconds. The maximum delay of 30 seconds is available for other variants of the module, but not for this specific version. The safety functions are certified according to standards EN ISO 13849-1 (Category 3, PL d) and IEC/EN 62061 (SIL 2), confirming suitability for safety-critical applications. The certifications TÜV, CCC, and UL-Recognized highlight its international usability.

Compatibility and Accessories

The module is designed for use in safety installations and can be used in conjunction with suitable switching devices or control systems. It is available in various variants, including models with redundant timing circuits or with 2 separate timing circuits. The module width of 45 mm allows installation in standard control panels. The note “optionally also available in housing for I-distributors” refers to other variants of the module, not to this specific version.

Mounting and Installation

Mounting is done in standard control panels with a module width of 45 mm. The connection terminals are designed for a secure connection. The switching position indicator enables visual monitoring of the operating status. Installation does not require auxiliary voltage, as the module can operate without external auxiliary voltage.

Operational Advantages

The forced-guided contacts increase safety by minimizing the risk of malfunction due to mechanical defects. The drop-out delayed function enables controlled shutdowns, which are required in many industrial applications. The certifications according to EN ISO 13849-1 and IEC/EN 62061 guarantee suitability for safety-critical installations. The screw terminals ensure a robust and durable connection. The module width of 45 mm allows easy integration into existing control panels.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153832
qrcode für Dold 0039705 BA7924.21 AC230V 0.3-3S delay module