Dold 0039409, EAN: 4030641394097

Dold 0039409 BA7924.21 DC24V 1-10S delay module

Dold 0039409 BA7924.21 DC24V 1-10S delay module

Lieske Part No. 1002380
Mfg Part No 0039409
EAN-Code 4030641394097
Manufacturer Dold
Here only 164,46 EUR
195,71 EUR incl. VAT

Further information for Dold 0039409 BA7924.21 DC24V 1-10S delay module

Technical data
1- / 2-channel1
ApprovalsUL-Recognized
Cat. / PL acc. to EN ISO 13849-13/d
ConnectionScrew terminals
Output contacts max.1 NC contact, 1 NO contact
SIL CL acc. to IEC/EN 620612
SIL acc. to IEC/EN 620612
Thermal current Ith max.8 A
Time delay max.30 s
Width45 mm
TypeBA 7924
Variant
Contact equipping1 NC contact, 1 NO contact
Nominal voltageDC 24 V
Time range1 - 10 s
Approvals and MarkingsTÜV, CCC
Variant1 timing circuit, adjustable time
The Dold BA7924.21 DC24V 1-10S is a delay module for industrial applications, used in safety control systems. It features a delayed-off circuit, where the output contacts do not switch immediately after the input voltage is turned off, but after an adjustable delay of 1 to 10 seconds. The maximum time delay is 30 seconds, with the specific setting adjustable within the range of 1 to 10 seconds. The device is designed for a nominal voltage of DC 24 V and includes a contact configuration of one normally open and one normally closed contact, which are mechanically interlocked. The switching position indicator allows for visual verification of the current state of the output contacts. The connection technology uses screw terminals, ensuring a secure and mechanically stable connection. The width is 45 mm, enabling compact mounting in standard control panels.

Applications
This module is designed for use in safety systems, particularly in conjunction with suitable switching devices or controls. It can be used in applications requiring a safety function up to PL d and Category 3 according to EN ISO 13849-1. Additionally, it is suitable for applications requiring a safety integrity level up to SIL 2 according to IEC/EN 62061 and EN 61508. The delayed-off function is particularly useful in systems where a controlled shutdown is required to avoid mechanical or thermal stress. Examples include the shutdown of drives, pumps, or heating systems, where an immediate shutdown could cause damage.

Functions and Equipment in Detail
The device operates without auxiliary voltage, meaning it is powered exclusively by the control voltage (DC 24 V). The time delay is adjustable and can be set within the range of 1 to 10 seconds. The output contacts are mechanically interlocked, meaning they are physically connected to ensure a secure switching function. The switching position indicator displays the current state of the contacts, facilitating diagnosis and maintenance. The maximum thermal current rating is 8 A, defining the load capacity of the contacts. The certifications include TÜV, CCC, and UL-Recognized, confirming compliance with international safety and quality standards.

Technology Explained Simply
The delayed-off function means that the output contacts do not switch immediately after the input voltage is turned off, but only after the set delay time has elapsed. This is important to ensure that mechanical or thermal systems are not suddenly switched off, which could cause damage. The mechanically interlocked contacts ensure that the normally open and normally closed contacts always switch synchronously, increasing reliability. The screw terminals allow for easy and secure connection of the wires. The width of 45 mm fits standard control panels and enables compact mounting.

Compatibility and Accessories
The module is designed for use in conjunction with suitable switching devices or controls. It can be used in systems requiring a safety function up to PL d and Category 3 according to EN ISO 13849-1. The certifications TÜV, CCC, and UL-Recognized confirm compliance with international standards. It is available in various variants, including with one or two separate time circuits, with the variant described here featuring a single adjustable time circuit. The width of 45 mm allows for mounting in standard control panels.

Mounting and Installation
Mounting is done in standard control panels with a width of 45 mm. The connection terminals are designed for connecting wires, secured via screw terminals. The switching position indicator allows for visual inspection of the operating status. Installation does not require additional tools, as the device operates without auxiliary voltage. The time delay setting is adjusted via a mechanical regulator, adjustable within the range of 1 to 10 seconds.

Advantages in Operation
The delayed-off function enables a controlled shutdown, preventing damage to mechanical or thermal systems. The mechanically interlocked contacts increase reliability by ensuring synchronous switching. The switching position indicator simplifies diagnosis and maintenance. Operational safety is ensured by the TÜV, CCC, and UL-Recognized certifications. The width of 45 mm allows for compact mounting in standard control panels. The maximum thermal current rating of 8 A ensures sufficient load capacity for typical industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002380
qrcode für Dold 0039409 BA7924.21 DC24V 1-10S delay module