Dold 0038525, EAN: 4030641385255

Dold 0038525 CB3056.11 AC/DC24V coupling relay

Dold 0038525 CB3056.11 AC/DC24V coupling relay

Lieske Part No. 1001784
Mfg Part No 0038525
EAN-Code 4030641385255
Manufacturer Dold
Here only 59,04 EUR
70,26 EUR incl. VAT

Further information for Dold 0038525 CB3056.11 AC/DC24V coupling relay

Technical data
Enclosure designSwitch cabinet
Output contacts max.1 C/O contact, 2 NO contacts
Thermal current Ith max.5 A
Width11,5 mm
TypeCB 3056
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping1 changeover contact
Nominal voltageAC/DC 24 V
The Dold coupling relay CB3056.11 AC/DC24V is an industrial coupling relay from the CB 3056 series, used as an interface between control and power circuits. It enables contact multiplication and provides separation between control and power circuits, ensuring safe potential isolation. The device is designed for use in enclosures and features a width of 11.5 mm, making it suitable for compact mounting in standard control panels. The rated voltage is AC/DC 24 V, allowing operation with both alternating and direct current. The contact configuration includes a changeover contact, which can be used for controlling loads in various switching states.

Applications
This coupling relay is intended for applications in industrial control technology, particularly in automation systems where galvanic separation between control and load circuits is required. It is suitable for controlling small loads, such as signal indicator lights, relays, or small motors, as well as for connecting control devices with power switches. The safe separation in accordance with IEC/EN 61140 and IEC/EN 60947-1, with a rated impulse voltage of 6 kV and pollution degree 2, ensures a high level of protection against electrical disturbances and overvoltages.

Functions and Features in Detail
The relay features an LED indicator that lights up when energized, visually signaling the operating status. The output contacts are configured as changeover contacts, with a maximum contact configuration of up to two normally closed contacts. The contacts are rated for a thermal current Ith of up to 5 A, defining the load capacity for continuous operation. The switching function is supported by an initiator actuation, enabling safe and reliable operation. A protective circuit is integrated at the coil input, increasing surge voltage resistance and protecting the device against transient voltage spikes.

Technology Explained Simply
The operating voltage of AC/DC 24 V allows flexible integration into existing control systems, which often operate at this voltage. The pickup time is less than 10 ms, and the drop-out time is less than 20 ms, ensuring a rapid response to control signals. The output rated voltage is AC 250 V, making the relay suitable for controlling loads in AC systems. The switching capacity according to AC 15 (make: 3 A / AC 230 V) and DC 13 (make: 1 A / DC 24 V) defines the maximum loads the relay can switch safely. The mechanical life exceeds 30 million switching operations, indicating high robustness and longevity.

Compatibility and Accessories
The coupling relay is part of the CB 3056 series and can be combined with other variants of the series, which offer different contact configurations (e.g., 1 normally open contact, 2 changeover contacts) or additional features (e.g., MOV at the input for increased surge voltage resistance). The devices comply with IEC/EN 60947-5-1 standards and are suitable for use in industrial environments. The rated insulation voltage is 300 V, and overvoltage category III is typical for industrial applications.

Mounting and Installation
The relay is designed for mounting in enclosures and is connected via the designated terminal clamps. The width of 11.5 mm allows for compact placement in standard control panels. The operating temperature range is from -25 °C to +60 °C, making the device suitable for use in demanding climatic conditions. The operating altitude is limited to a maximum of 2000 m above sea level.

Advantages in Operation
The combination of safe isolation, high switching capacity, and long service life makes the coupling relay a reliable component in industrial control systems. The integrated LED indicator simplifies diagnostics and maintenance, as the operating status is directly visible. The protective circuit at the coil input increases interference resistance and extends the device's lifespan. Compliance with IEC/EN 60947-5-1 ensures adherence to required safety and performance standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001784
qrcode für Dold 0038525 CB3056.11 AC/DC24V coupling relay