Further information for Dold 0037839 IK8807.02AC50/60HZ230V central switch
Technical data
Output contacts max.
2 NO contacts
Thermal current Ith
10 A
Width
17,5 mm
Type
IK 8807
For top hat rail mounting
Variant
Contact equipping
2 NO contacts
Nominal voltage
AC 230 V
The remote switch IK8807.02AC50/60HZ230V from Dold is an industrial switching device type for implementing central switching systems. It enables the central switching on and off of multiple consumer groups from a central control station. For each consumer group, one such remote switch is required, which can be operated via room switches as well as central switches. When the central control (ZE or ZA) is activated, the function of the room switches is deactivated, so that no local switching operations are effective anymore. This ensures a clear hierarchy in control and prevents conflicts between central and local operation.
Applications
The remote switch is suitable for applications in building automation, industrial control technology, and electrical distribution systems where central control of lighting or machine circuits is required. It is used, for example, in office buildings, production halls, or administrative buildings to control multiple rooms or machine blocks via a central switching station. The devices are designed for continuous operation and can be operated in environments with a temperature range from -20 °C to +45 °C.
Functions and Equipment in Detail
The device features 2 close contacts as output contacts, designed for a rated voltage of AC 230 V. The maximum switching capacity is 10 A at 230 V for lamp loads, with a mechanical life expectancy exceeding 50 million switching operations. The switching frequency is specified at 1000 switching operations per hour. The contacts are designed for a filament lamp load of 1000 W and a fluorescent lamp load of 2000 W (in duo circuit). The ZE (Central On) and ZA (Central Off) inputs are designed such that activating either of these inputs renders control via room switches ineffective. This is a central function for prioritizing central control.
Technology Explained Simply
The remote switch operates at a rated voltage of AC 230 V and a frequency of 50/60 Hz. The operating voltage must be within the range of 0.9 to 1.1 times the rated voltage. The ZE and ZA inputs, as well as the room switch inputs, must be connected to the same phase. During commissioning, the output relay position can be defined by briefly applying the operating voltage to ZA. The devices are designed with a thermal current rating of 10 A (Ith), which describes the maximum continuous current load. The switching capacity is optimized for lamp loads, and the contacts are also suitable for other load types, as long as the electrical limits are not exceeded.
Compatibility and Accessories
The remote switch is designed for mounting on a DIN rail (standard rail), enabling quick and secure installation in distribution boxes. The width is 17.5 mm, making it suitable for standard distribution boxes. The terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule according to DIN 46228). The enclosure protection rating is IP 30, providing protection against solid foreign objects and limited splashing water. The terminals themselves have a protection rating of IP 20. The devices comply with the standard IEC/EN 60669, which applies to command devices and switches in electrical installations.
Mounting and Installation
Mounting is done via the integrated DIN rail mounting, enabling quick and secure installation. The connection terminals are flat terminals with self-lifting connection washers, ensuring simple and secure connection of the conductors. The conductor connections must be labeled according to the requirements of standard EN 50005. The devices are designed for an operating temperature range of -20 °C to +45 °C and exhibit high vibration resistance (amplitude 0.35 mm, frequency 10–55 Hz). The climatic resistance is specified according to IEC/EN 60068-1 as 20/045/04.
Advantages in Operation
The remote switch IK8807.02 offers a reliable and low-maintenance control solution for central switching systems. The clear hierarchy between central and room switches prevents unwanted switching operations. The high mechanical life and switching durability for lamp loads make the device suitable for long-term applications. The DIN rail mounting and standardized connection terminals simplify installation and maintenance. Compliance with the IEC/EN 60669 standard ensures safe and compatible integration into existing electrical systems.