Further information for Dold 0037443 coupling relay CA3056.01/001 220-240V
Technical data
Enclosure design
Switch cabinet
Output contacts max.
1 NC contact, 1 NO contact
Thermal current Ith max.
5 A
Width
11,5 mm
Type
CA 3056
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 NO contact
Nominal voltage
AC 220 - 240 V
Variant
Input circuit with MOV
The coupling relay CA3056.01/001 AC50/60HZ 220-240V from Dold is an industrial component for contact multiplication and serves as an interface between control and power circuits. It is designed for use in enclosures and enables galvanic isolation between control and load circuits. The width of 11.5 mm allows for compact mounting in standard control panels. The device is equipped with an input circuit that integrates a MOV (Metal Oxide Varistor) to increase surge voltage resistance and protect the coil from transient overvoltages.
Coupling relay with 1 normally closed contact as contact configuration is designed for controlling loads operating in the range of AC 220–240 V and 50/60 Hz. The rated voltage is in the range of AC 220–240 V, with the operating voltage range for alternating current between 80 and 110 % of the rated voltage. The coil consumes a rated power of 0.8 VA at 230 V AC. The pickup time is less than 10 ms, and the drop-out time is less than 20 ms, ensuring a rapid response to control signals.
Functions and equipment in detail include an LED indicator that lights up when the relay is energized and visually signals the operating status. The contacts are rated for a maximum thermal load of 5 A. The output contacts are available as 1 normally closed and 1 normally open, but the contact configuration for this described variant is fixed at 1 normally closed. The contacts are designed for switching operations according to AC 15, where the normally closed contact can handle a maximum switching current of 3 A at AC 230 V and the normally open contact 1 A at AC 230 V. For direct current switching (DC 13), the maximum switching current is 1 A at DC 24 V.
Technology explained simply shows that the relay is manufactured in accordance with the standard IEC/EN 60947-5-1, which defines requirements for electrical and mechanical life, as well as switching capacity for coupling relays. The electrical life exceeds 800,000 switching operations at 3 A and AC 230 V. The mechanical life is over 30 million switching operations. The rated insulation voltage is 300 V, and the overvoltage category III is suitable for applications in industrial environments. The rated impulse voltage between input and output is 6 kV at pollution degree 2, ensuring safe isolation in accordance with IEC/EN 61140 and IEC/EN 60947-1.
Compatibility and accessories refers to use in control systems, where the relay serves as an interface between control device and load. It is designed for use in enclosures and can be combined with other relays from the CA-, CB- and CC-series, which offer different contact configurations and switching functions. The variant with MOV at the input increases immunity against transient voltage spikes, which is advantageous in industrial installations with high electrical loads.
Mounting and installation is carried out in standard control panels with a width of 11.5 mm. The housing is made of thermoplastic material with VO behaviour according to UL 94, ensuring good flame resistance. The operating temperature ranges from -25 °C to +60 °C, and the storage temperature is also between -25 °C and +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level. The housing protection rating is IP 40, and the terminal connection protection rating is IP 20.
Advantages in operation include galvanic isolation between control and load circuits, high switching life, and integrated surge voltage protection via the MOV. The LED indicator enables easy diagnosis of the operating status. The relay is designed for continuous operation and is suitable for applications requiring reliable and low-maintenance switching functions. The contact configuration with 1 normally closed contact is suitable for standard applications in industrial environments, especially when simple signal transmission from control to load is required.
The contacts are suitable for switching small loads, where the gold plating (5 μm Au) may be burned off at high switching currents, rendering the device unsuitable for small loads afterwards. The maximum switching capacity for small loads is 2–60 V, 1–300 mA, 10 mW–12 W. However, the contacts are also designed for maximum switching current, so the relay can also be used for higher loads when the gold plating is not required.
The short-circuit withstand capability is defined with a maximum fuse rating of 6 A gG/gL according to IEC/EN 60947-5-1. The permissible switching frequency is 20 switching operations per second. EMC requirements include protection against electrostatic discharge (ESD) up to 8 kV (air), HF radiation up to 10 V/m in the frequency range 80 MHz to 6 GHz, fast transients up to 4 kV, and overvoltages between lines (1 kV) as well as between line and ground (2 kV). The immunity corresponds to Class B according to EN 55011.
The relay is designed for use in industrial control systems where reliable and robust switching functions are required. The combination of compact design, high life expectancy, and integrated protection against overvoltages makes it a suitable component for applications in automation technology, machine building, and process control.