Dold 0037340, EAN: 4030641373405

Dold 0037340 coupling relay CB3056.11/001 220-240V

Dold 0037340 coupling relay CB3056.11/001 220-240V

Lieske Part No. 1001787
Mfg Part No 0037340
EAN-Code 4030641373405
Manufacturer Dold
Here only 65,99 EUR
78,53 EUR incl. VAT

Further information for Dold 0037340 coupling relay CB3056.11/001 220-240V

Technical data
Enclosure designSwitch cabinet
Output contacts max.1 C/O contact, 2 NO contacts
Thermal current Ith max.5 A
Width11,5 mm
TypeCB 3056
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping1 changeover contact
Nominal voltageAC 220 - 240 V
VariantInput circuit with MOV
The Dold coupling relay CB3056.11/001 AC50/60HZ 220-240V is an industrial coupling relay for use in enclosures. It serves as an interface between control and power circuits and enables contact multiplication. The device is designed for a rated voltage of AC 220–240 V and operates at a rated frequency of 50/60 Hz. The width is 11.5 mm, making it suitable for use in standard control panels. The contact configuration includes one changeover contact, with a maximum contact arrangement of up to two close contacts possible. The coil is equipped with a protective circuit incorporating an MOV (Metal Oxide Varistor) at the input to ensure higher surge voltage resistance. Initiator actuation is provided, facilitating integration into control systems.

Coupling relays are specifically designed for signal transmission between different electrical systems. The CB3056.11/001 functions as an electrical switch activated by a control voltage, thereby closing or opening one or more electrical contacts. The configuration with a changeover contact allows simultaneous control of two circuits, where one contact closes while the other opens. The contacts are rated for a maximum thermal current load of 5 A, defining their load capacity under continuous operation.

Technology explained clearly – The relay operates on the principle of electromagnetic actuation: When the operating voltage is applied to the coil (A1/A2), a magnetic field is generated that moves the armature and closes the contacts. The LED indicator lights up when the relay is energized, visually signaling its operating status. The coil is rated for a nominal power consumption of 0.8 VA at AC 230 V. The pickup time is less than 10 ms, and the drop-out time is less than 20 ms, enabling fast switching response. The electrical life expectancy exceeds 800,000 switching operations at 3 A and AC 230 V (according to AC 15), while the mechanical life expectancy exceeds 30 million switching operations. The short-circuit withstand capability is defined by a maximum fuse rating of 6 A gG/gL.

Compatibility and accessories – The relay is compliant with IEC/EN 60947-5-1 and provides safe isolation between input and output with a rated impulse withstand voltage of 6 kV and pollution degree 2 (according to IEC/EN 60664-1). The rated insulation voltage is 300 V, and the overvoltage category is III. The operating temperature range is between -25 °C and +60 °C, and the storage temperature range is also between -25 °C and +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level. The housing design is intended for use in enclosures, with the housing protection rating being IP 40 and the terminal protection rating IP 20.

Mounting and installation – The relay is mounted in standard control panels, with the width of 11.5 mm allowing placement in typical enclosure modules. The terminal connections are designed for wiring, with voltage ranges defined for AC 80–110 % of the rated voltage. The operating voltage is connected to terminals A1/A2, and the output contacts are connected to terminals 11, 12, 13, 14 according to the contact configuration (here: 1 changeover contact).

Operational advantages – The integrated MOV protective circuit at the input increases surge voltage resistance and protects the device against transient voltage spikes. The LED indicator allows for quick visual verification of the operating status. The safe isolation according to IEC/EN 61140 and IEC/EN 60947-1 ensures high electrical safety. The relay is designed for continuous operation and is suitable for applications in industrial control technology where reliable signal transmission and contact multiplication are required. The contact configuration with a changeover contact offers flexibility in circuit configuration.

Functions and equipment in detail – The device features an LED indicator that lights up when the relay is energized. The output contacts are rated for a maximum nominal voltage of AC 250 V. The switching capacity according to AC 15 is 3 A at AC 230 V for closing contacts and 1 A for opening contacts. The switching capacity according to DC 13 is 1 A at DC 24 V. The permissible switching frequency is 20 operations per second. The contacts are optionally available with a 5 μm Au coating to enable switching of low-power loads (2–60 V, 1–300 mA, 10 mW–12 W), although the gold plating may burn off at higher currents, rendering the device unsuitable for low-power applications thereafter.

Applications – The coupling relay is suitable for use in industrial automation, control systems, and systems requiring potential separation. It is used for signal transmission between control and power circuits, for example in systems controlling motors, heaters, pumps, or lighting. The safe isolation and high surge voltage resistance also make it suitable for applications in environments with high electromagnetic compatibility (EMC). Compliance with IEC/EN 60947-5-1 ensures adherence to safety and reliability requirements in industrial installations.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001787
qrcode für Dold 0037340 coupling relay CB3056.11/001 220-240V