Dold 0037230, EAN: 4030641372309

Dold 0037230 coupling relay ML3059.12/100 AC/DC12-240V

Dold 0037230 coupling relay ML3059.12/100 AC/DC12-240V

Lieske Part No. 1001843
Mfg Part No 0037230
EAN-Code 4030641372309
Manufacturer Dold
Here only 146,06 EUR
173,81 EUR incl. VAT

Further information for Dold 0037230 coupling relay ML3059.12/100 AC/DC12-240V

Technical data
Enclosure designSwitch cabinet
Output contacts max.2 C/O contacts
Thermal current Ith max.5 A
Width22,5 mm
TypeML 3059
Initiator triggeringYes
Variant
Contact equipping2 changeover contacts
Nominal voltageAC/DC 12 - 240 V
VariantWith safe separation. For switching low loads
The ML3059.12/100 coupling relay from Dold is an industrial switching component for connecting control and power circuits. It serves as an interface for isolating and amplifying control signals in demanding applications. The device features a contact configuration with 2 changeover contacts and is designed for a rated voltage range of AC/DC 12–240 V. This variant is equipped with safe isolation, which, in accordance with IEC/EN 61140 and IEC/EN 60947-1, ensures a rated impulse withstand voltage of 6 kV at pollution degree 2. This isolation is provided both between coil and contacts and between the two contacts, enabling galvanic isolation for controlling small loads.

Applications
This coupling relay is designed for use in industrial control systems, particularly in installations where potential separation between control and load circuits is required. It is suitable for controlling small loads, for example, when integrating sensors, relays, or small drives. Compatibility with 2-wire initiator actuation makes it especially suitable for use with proximity switches and other sensors operating via 2-wire actuation. The operating voltage covers both alternating and direct current in the range of 12 to 240 V, enabling flexible integration into various power supply systems.

Functions and Equipment in Detail
The device features an LED indicator that visually signals the operating status of the relay. When the relay is energized, the LED lights up, facilitating status monitoring during operation. The contact configuration with 2 changeover contacts enables control of multiple loads or the implementation of redundant switching circuits. The pickup and drop-out time of the contacts is each ≤ 10 ms, ensuring a rapid response to control signals. The maximum electrical life is 500,000 switching operations at 3 A and AC 230 V, according to IEC/EN 60947-5-1, and the mechanical life exceeds 30 million switching operations.

Technology Explained Simply
The relay coil is operated with a voltage in the range of AC/DC 12–240 V. The permissible voltage variation is 0.85–1.1 times for AC and 0.9–1.15 times for DC relative to the rated voltage. The thermal current Ith is maximum 5 A, defining the contact load capacity. The switching capacity according to AC 15 is 3 A at AC 230 V for closing contacts and 1 A for opening contacts. The maximum permissible switching frequency is 6000 switching operations per hour. Short-circuit resistance is ensured by a maximum fuse rating of 6 A gG/gL according to IEC/EN 60947-5-1.

Compatibility and Accessories
The coupling relay is designed for mounting on a DIN rail (DIN-EN 60715) and is therefore suitable for use in enclosures. The terminal connections are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule according to DIN 46228-1/-2/-3/-4). The stripping length for conductors is 8 mm. The terminal fastening is achieved via flat terminals with self-lifting connection washers, with a tightening torque of 0.8 Nm. The device dimensions are 22.5 mm (width) x 81 mm (height) x 98.5 mm (depth). The enclosure protection rating is IP 40, and the terminals are rated IP 20.

Mounting and Installation
Mounting is performed on a DIN rail inside the enclosure. The terminal connections are designed for solid or stranded conductors, with the required stripping length of 8 mm to be observed. Fastening is done using flat terminals with self-lifting connection washers, ensuring a secure and durable connection. The device is designed for continuous operation and can be operated in a temperature range from -20 °C to +60 °C. The relative humidity must not exceed 93 % at 40 °C. The operating altitude is limited to a maximum of 2000 m above sea level.

Advantages in Operation
The coupling relay provides reliable galvanic isolation between control and load circuits, increasing safety in industrial installations. The integrated LED indicator enables simple status monitoring. The compact design with a width of 22.5 mm optimizes space requirements in the enclosure. The high mechanical life and robust construction ensure long service life with minimal maintenance. Compatibility with 2-wire initiators expands application possibilities in modern control systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001843
qrcode für Dold 0037230 coupling relay ML3059.12/100 AC/DC12-240V