| Technical data |
| Enclosure design | Front panel mounting |
| Output contacts | 1 C/O contact |
| Time function(s) | Off-delay, with control signal |
| Width | 72 mm |
| Type | EF 7666 |
| Variant |
| Contact equipping | 1 changeover contact delayed, 1 changeover undelayed |
| Nominal voltage | AC 24 V |
| Time range | 0,15 s - 30 h |
The Dold time relay EF7666.32 is a delayed-release industrial time relay for front panel mounting, designed for a rated voltage of AC 24 V and a time range from 0.15 seconds to 30 hours. It belongs to the MINITIMER series and is used for time-delayed control of devices and system components, for example, to account for the coast-down behavior of motors or for controlled shutdown of systems. The function is based on a purely mechanical time delay, which can be adjusted via a continuously variable rotary switch on the front side. The time delay occurs after switching off the control signal, with the contacts only switching after the set delay time has elapsed.
Applications
This device is designed for industrial applications where precise, time-controlled shutdown is required. Typical applications include controlling fans, pumps, lighting systems, or other system components that must continue running or be switched off for a specific period after the main signal is turned off. The zero-voltage safety ensures that the relay safely returns to its default position in case of power loss, which is important for safety in production facilities.
Functions and Equipment in Detail
The time relay features contact configuration with one delayed changeover contact and one instantaneous changeover contact. The delayed contacts switch only after the set time has elapsed, while the instantaneous contacts respond immediately when the control signal is applied. The time delay indicator allows visual monitoring of the timing process. The switching position indicator shows the current state of the contacts, facilitating functional control during operation. The repeatability is ≤ ± 0.5 % of the scale end value, with a permissible deviation of ≤ ± 1 % in the range of 3 and 6 seconds.
Technology Explained Simply
The time delay is implemented via a mechanical mechanism controlled by a continuously adjustable rotary switch on the front side. Adjustment is made via an absolute scale, allowing precise setting of the delay time. The time ranges are available in six switchable steps, with the present type EF7666.32 covering a range from 0.15 s to 30 h. The contact reset time is less than 60 ms, and the pickup time is under 35 ms. The reset time is less than 150 ms, which is very short and allows for rapid repetition of the function.
Compatibility and Accessories
The device is designed for use in industrial control systems and complies with standard EN 61812-1. It is designed for front panel mounting and has a width of 72 mm. The front side is spray water protected and meets the protection class IP 65, enabling use in outdoor or humid environments. The contact configuration is rated for an operating voltage of AC 250 V. The electrical life is at least 100,000 switching operations at 3 A and AC 230 V, and at least 500,000 switching operations at 1 A and AC 230 V. The mechanical life exceeds 30 million switching operations or over 15,000 operating hours.
Mounting and Installation
The relay is mounted into a front panel with an installation width of 72 mm. The terminal clamps are designed for connection to wires, with a maximum fuse rating of 10 A gG / gL. The voltage range coverage is 0.8 to 1.1 times the rated voltage. The rated frequency is switchable for 50/60 Hz. Mounting is carried out in the usual manner for front panel-mounted devices, with electrical connections to be made according to the manufacturer’s circuit diagrams.
Advantages in Operation
The combination of wide adjustment range, high repeatability, and mechanical reliability makes this device a robust solution for time-controlled applications. Front-side adjustment allows for easy and quick adaptation of the delay time during operation. Zero-voltage safety and switching position indicator enhance safety and maintainability. The IP 65 protection class extends the range of applications to humid or dusty environments. The contact materials consist of AgNi with a gold layer of 0.2 μm, ensuring high switching capacity and long service life.