Dold 0035355, EAN: 4030641353551

Dold 0035355 MK9052.12 DC24V thermistor motor protection relay

Dold 0035355 MK9052.12 DC24V thermistor motor protection relay

Lieske Part No. 1002255
Mfg Part No 0035355
EAN-Code 4030641353551
Manufacturer Dold
Here only 153,82 EUR
183,05 EUR incl. VAT

Further information for Dold 0035355 MK9052.12 DC24V thermistor motor protection relay

Technical data
ClassificationThermistor-Motorschutz
Enclosure designSwitch cabinet
Measuring range max.> 3 kΩ
Output contacts2 C/O contacts
Width22,5 mm
TypeMK 9052
Variant
Auxiliary voltageDC 24 V
Contact equipping2 changeover contacts
The Dold MK9052.12 DC24V is a thermistor motor protection relay designed for use in industrial applications, particularly to prevent thermal motor overload. It is mounted in enclosures and monitors the temperature of electric motors via special PTC resistors (positive temperature coefficient resistors), which serve as temperature sensors. When a critical resistance value is reached, the output relay is de-energized to protect the motor from damage. The device operates on the standby current principle, where the output relay is not activated in the event of a fault, ensuring a safe disconnection. The auxiliary voltage is DC 24 V, and the contact configuration includes 2 changeover contacts, which can be used to control auxiliary circuits or indicator lights.

Applications
This relay is designed for use in industrial drive technology, where motors may be thermally overloaded due to high switching frequency, heavy start-up, single-phase operation, impaired cooling, or high ambient temperature. It protects motors in pumps, fans, conveyor systems, and other machinery operated continuously or under demanding conditions. The integrated wire break detection in the sensor circuit ensures that a defective or interrupted temperature sensor is detected, preventing malfunctions. Up to 6 sensors can be connected, wired in series.

Functions and Features in Detail
The MK9052.12 features an input for thermistors or bimetal contacts. The pickup value is at a resistance of ≥ 3 kΩ, and the drop-out value is ≤ 1.8 kΩ. The measurement circuit load is approximately 1 mW (at R = 1.5 kΩ), minimizing sensor load. The measurement voltage is approximately 1.2 V (at R = 1.5 kΩ). The output contacts are configured as 2 changeover contacts, with a pickup delay of less than 20 ms and a drop-out delay of less than 15 ms. An LED indicates the relay’s switching state, enabling visual monitoring during operation.

Technical Explanation
The relay operates on the standby current principle, where the output relay is energized during normal operation and de-energizes when the pickup value is reached. This prevents false alarms caused by a faulty sensor or interruption in the sensor circuit. The integrated wire break detection monitors the sensor circuit and responds to interruptions to ensure safe operation. The auxiliary voltage of DC 24 V is supplied via terminals A1/A2. The operating temperature range is from -20 °C to +60 °C, and the device is designed for continuous operation. The operating altitude is limited to below 2000 m.

Compatibility and Accessories
The device is designed for use with PTC resistors (thermistors) specifically developed for motor protection. Up to 6 sensors can be connected, wired in series. The terminals are rated for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule DIN 46228-1/-2/-3/-4). Mounting is via a DIN rail (top hat rail) in accordance with IEC/EN 60715. The switching capacity is 3 A / AC 230 V for make contacts and 1 A / AC 230 V for break contacts, per IEC/EN 60947-5-1. The electrical life expectancy is over 800,000 switching operations at 3 A and AC 230 V.

Mounting and Installation
Mounting is performed in an enclosure on a DIN rail. The terminals are equipped with self-lifting connection washers, enabling secure and easy connection of wires. The tightening torque is 0.4 Nm. The device dimensions are 22.5 mm (width) x 82 mm (height) x 99 mm (depth). The enclosure protection rating is IP 40, and the terminal protection rating is IP 20. The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is also from -20 °C to +60 °C. The device is designed for use in industrial environments at altitudes below 2000 m.

Operational Advantages
The MK9052.12 provides reliable thermal motor monitoring with integrated wire break detection, minimizing malfunctions. The low measurement circuit load protects the sensors, and the short pickup and drop-out delays ensure rapid response. Visual indication via an LED simplifies maintenance and diagnostics. The design in accordance with IEC/EN 60947-8 ensures compliance with international standards. Mounting on a DIN rail allows flexible integration into existing control systems. The mechanical life expectancy exceeds 20 million switching operations, ensuring high operational reliability and longevity.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002255
qrcode für Dold 0035355 MK9052.12 DC24V thermistor motor protection relay