Dold 0034189, EAN: 4030641341893

Dold 0034189 MK3046.29 DC24V coupling relay

Dold 0034189 MK3046.29 DC24V coupling relay

Lieske Part No. 1001827
Mfg Part No 0034189
EAN-Code 4030641341893
Manufacturer Dold
Here only 128,65 EUR
153,09 EUR incl. VAT

Further information for Dold 0034189 MK3046.29 DC24V coupling relay

Technical data
Enclosure designSwitch cabinet
Thermal current Ith max.5 A
Width22,5 mm
TypeMK 3046
Variant
Contact equipping2 x 1 changeover contact, 1 x 1 NO contact
Nominal voltageDC 24 V
The MK3046.29 DC24V coupling relay from Dold is an industrial relay designed for contact multiplication and galvanic isolation between control and power circuits. It features a compact design with a width of 22.5 mm and is intended for use in enclosures. The device complies with the standard IEC/EN 60947-5-1 and offers a clear, structured contact configuration with 2 x 1 changeover contacts and 1 x 1 normally open contact. The rated voltage is DC 24 V, with an operating voltage range between 0.8 and 1.1 times the rated voltage. The thermal current Ith max. is 5 A, indicating the maximum current load for continuous operation.

Coupling relay are used in control engineering to distribute a control signal to multiple outputs without connecting the electrical potentials of the control and power circuits. This is particularly important in systems where safety and galvanic isolation are required. The MK3046.29 is designed for this purpose and enables the control of multiple loads via a single control signal.

Functions and equipment in detail

The relay features three separately controllable relay systems, with the contact configuration consisting of 2 x 1 changeover contacts and 1 x 1 normally open contact. The changeover contacts allow switching between two states, while the normally open contact closes when the relay is energized. Control is achieved via terminals A1, A2, and A3, with A11 serving as a common negative terminal. LED indicators show the energized state of each individual relay system, simplifying diagnosis and maintenance. The switching-on time is 5 ms, and the switching-off time is 7 ms, ensuring fast response in control sequences.

Technology explained clearly

The device operates at a rated voltage of DC 24 V and consumes 0.5 W. The contact configuration is designed to meet various switching requirements. The mechanical life is 30 million switching operations, indicating high durability. The electrical life is 0.5 x 10⁵ switching operations at 3 A and AC 230 V (AC 15). The switching capacity according to AC 15 for normally open contacts is 3 A / AC 230 V, and for normally closed contacts, 1 A / AC 230 V. For DC 13, the switching capacity for both normally open and normally closed contacts is 1 A / DC 24 V. The maximum short-circuit withstand requires a fuse with max. 4 A gG / gL.

Compatibility and accessories

The coupling relay is designed for use in industrial control systems and can be combined with other relays from the MK 3046 series, particularly variants such as MK 3046.13, which feature a different contact configuration (1 x 1 changeover contact, 1 x 2 changeover contacts). It is designed for operation in enclosures and is mounted on a DIN rail (DIN 46228). The terminals are designed for conductor cross-sections of 2 x 1.5 mm² (solid) or 2 x 1.0 mm² (stranded wire with ferrule). The wire stripping length is 7 mm, and the tightening torque for the terminals is 0.8 Nm.

Mounting and installation

Mounting is done via a DIN rail in accordance with IEC/EN 60715. The terminals are equipped with self-lifting connection washers, ensuring a simple and secure connection. The device dimensions are 22.5 mm (width) x 82 mm (height) x 99 mm (depth). The device is designed for continuous operation and can be used at operating temperatures from -20 °C to +60 °C. Storage is also permitted in the range of -20 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level.

Advantages in operation

The MK3046.29 coupling relay offers a reliable and compact solution for contact multiplication in industrial applications. The LED indicators facilitate visual monitoring of the operating status. The high mechanical life and switching capacity according to IEC/EN 60947-5-1 ensure long service life under industrial conditions. The galvanic isolation between control and power circuits increases safety and prevents interference in the control system. The compact design with a width of 22.5 mm enables efficient space utilization in enclosures.

Protection rating and environmental conditions

The relay housing has a protection rating of IP 40 according to IEC/EN 60529, protecting against finger contact and solid objects larger than 1 mm. The terminals have a protection rating of IP 20, protecting against finger contact. The housing is made of thermoplastic with V0 behavior according to UL Subject 94, indicating a high flame retardancy class. The vibration resistance is specified with an amplitude of 0.35 mm at a frequency of 10 to 55 Hz. The climatic resistance is specified according to IEC/EN 60068-1 as 20 / 060 / 04, describing the resistance to temperature and humidity changes.

EMC and safety requirements

The device meets the requirements for electromagnetic compatibility (EMC) according to IEC/EN 61000-4-2 to -4-6. The electrostatic discharge (ESD) is 8 kV (air discharge), and the high-frequency radiation is 10 V/m in the range of 80 MHz to 2.7 GHz. Fast transients are 2 kV, and surge voltages between supply lines are 1 kV, and between line and earth are 2 kV. Radio frequency interference complies with emission limit class B according to EN 55011. The creepage and clearance distances are specified according to IEC 60664-1 with a rated impulse voltage of 4 kV and pollution degree 2.

Application areas

The coupling relay is used in industrial automation, particularly in control systems where galvanic isolation between control and power circuits is required. It is suitable for controlling small loads, such as signal indicator lights, relays, or small motors. Typical applications include enclosures and control systems in manufacturing, packaging, and machine building industries. The LED indicators facilitate diagnosis and maintenance during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001827
qrcode für Dold 0034189 MK3046.29 DC24V coupling relay