Dold 0034143, EAN: 4030641341435

Dold 0034143 thermistor motor protection relay BA9038.11 110V

Dold 0034143 thermistor motor protection relay BA9038.11 110V

Lieske Part No. 1153676
Mfg Part No 0034143
EAN-Code 4030641341435
Manufacturer Dold
Here only 112,30 EUR
133,64 EUR incl. VAT

Further information for Dold 0034143 thermistor motor protection relay BA9038.11 110V

Technical data
ClassificationThermistor-Motorschutz
Enclosure designSwitch cabinet
Measuring range max.> 3 kΩ
Output contacts1 C/O contact, 2 C/O contacts
Width45 mm
TypeBA 9038
Variant
Auxiliary voltageAC 110 V
Contact equipping1 changeover contact
VariantWithout thermal reclosing interlock (manual reset function)
The Thermistor motor protection relay BA 9038 from Dold is an enclosure device designed to prevent thermal motor overloads. It is used to protect motors from damage caused by high switching frequency, heavy start-up, single-phase operation, impaired cooling, or high ambient temperature. Additionally, it enables temperature monitoring of bearings, gearboxes, oils, and coolants. The device operates on the rest current principle, where the output relay is not activated in the event of a fault, and monitors the sensor circuit for wire breakage. The auxiliary voltage is AC 110 V, and the width is 45 mm. The variant BA9038.11 is designed without a re-energizing lockout (reset function) and features a changeover contact as the output contact.

Applications
This relay is designed for use in industrial plants where reliable temperature monitoring of electric motors is required. It protects against thermal overloads that can arise from various operating conditions. Applications range from monitoring motors in production plants to temperature control in gearboxes or oil systems. The use of up to six thermistors in series allows flexible adaptation to different motor sizes and requirements.

Functions and equipment in detail
The device features an input for thermistors or bimetal contacts. As temperature sensors, special PTC resistors (positive temperature coefficient resistors) are used, which are integrated into the motor windings. When a predefined resistance value (≥ 3 kΩ) is reached, the output relay drops out, and an LED lights up. The reset threshold is ≤ 1.8 kΩ. The response delay is maximum 20 ms, and the reset delay is maximum 15 ms. The connecting wires from the thermistor to terminals P1 and P2 must not be influenced by external voltages and should be routed in a separate cable. The total resistance of the wiring must not exceed 100 Ω.

Technology explained simply
The relay operates on the rest current principle, meaning that the output relay is activated during normal operation and drops out when the trip temperature is reached. This principle ensures a safe and reliable response to overheating. The wire break detection in the sensor circuit ensures that a defective or broken sensor is detected, preventing false alarms. The auxiliary voltage of AC 110 V is supplied via terminals A1/A2. The output contacts (1 changeover contact) are connected to terminals 11, 12, 14.

Compatibility and accessories
The relay is compliant with IEC/EN 60947-8. It is designed for use with special PTC resistors developed for motor protection. The connection terminals are designed for connecting thermistors and auxiliary voltage supply. The device variant BA9038.11 is without re-energizing lockout, meaning that the relay automatically resumes operation once the temperature falls below the reset threshold. Other variants with re-energizing lockout (e.g. BA9038._ _ /100) require manual reset by pressing a button on the front.

Mounting and installation
The device is designed for installation in enclosures. The width of 45 mm allows for compact mounting in standard control panels. The connection terminals are clearly labeled: A1/A2 for auxiliary voltage, P1/P2 for the measurement input, and 11-14 as well as 21-24 for the output contacts. The wiring of the thermistors must be carried out carefully to ensure correct operation.

Advantages in operation
Reliable temperature monitoring protects motors from thermal damage and extends the service life of the system. The integrated wire break detection prevents false alarms caused by defective sensors. The clear indication via the LED enables quick identification of faults. The voltage-free state in variants with re-energizing lockout ensures that the relay's state is retained even after a power failure. The simple mounting and maintenance in enclosures make the device a robust solution for industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153676
qrcode für Dold 0034143 thermistor motor protection relay BA9038.11 110V