Dold 0034040, EAN: 4030641340407

Dold 0034040 coupling relay IK3076.11/004 230-240V

Dold 0034040 coupling relay IK3076.11/004 230-240V

Lieske Part No. 1001804
Mfg Part No 0034040
EAN-Code 4030641340407
Manufacturer Dold
Here only 66,91 EUR
79,62 EUR incl. VAT

Further information for Dold 0034040 coupling relay IK3076.11/004 230-240V

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.10 A
Width17,5 mm
TypeIK 3076
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping1 changeover contact
Nominal voltageAC 230 - 240 V
VariantFor switching low loads
The IK3076.11/004 coupling relay from Dold is an industrial component for contact multiplication and serves as an interface between control and power circuits. It is specifically designed for use in industrial and railway applications and enables potential separation between control and switching circuits. The IK3076.11/004 variant is rated for a nominal voltage of AC 230–240 V and features a contact configuration with 1 changeover contact. The device design is intended for installation distributors according to DIN 43880, with a mounting depth of 59 mm and bottom-mounted connection terminals. The mounting width is 17.5 mm, enabling compact installation in standard distributor boxes.

Applications
This relay is suitable for applications requiring secure separation between control and power circuits, such as in automation systems, machine controls, or rail vehicle technology. The version with 1 changeover contact ensures secure separation in accordance with IEC/EN 61140 and IEC/EN 60947-1. The variant is specifically designed for switching small loads, making it suitable for applications with low current requirements.

Functions and Equipment in Detail
The device features an LED indicator that lights green when the relay is energized, enabling visual monitoring of the operating status. The initiator actuation is integrated, allowing control via external signals. The coil is equipped with a protective circuit at the input, protecting against voltage surges and increasing the reliability of the device. The pickup and drop-out time is less than 10 ms and less than 20 ms respectively, ensuring a fast response to control signals.

Technology Explained Simply
The thermal current Ith is up to 10 A, describing the maximum continuous load capacity of the contacts. The relay is designed for continuous operation and can be operated in a temperature range from -25 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m above sea level. The switching capacity according to AC 15 is 3 A at AC 230 V for the make contact and 1 A at AC 230 V for the break contact. The electrical life at 3 A and AC 230 V is 1 x 10⁵ switching operations. The mechanical life is over 30 x 10⁶ switching operations. The permissible switching frequency is 6000 switching operations per hour.

Compatibility and Accessories
The relay is suitable for mounting on a DIN rail (IEC/EN 60715) or by screw mounting (M4, pitch 90 mm). The connection terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with sleeve DIN 46228-1/-2/-3/-4). The stripping length is 10 mm. The terminal fastening is done via flat terminals with self-lifting connection washers, with a tightening torque of 0.8 Nm. The housing protection rating is IP 40, and the terminals are rated IP 20.

Mounting and Installation
Mounting is either on a DIN rail according to IEC/EN 60715 or by screw mounting with M4 screws at a pitch of 90 mm. The connection terminals are arranged at the bottom, facilitating integration into installation distributors. The mounting depth of 59 mm and mounting width of 17.5 mm allow for compact placement in standard distributor boxes.

Operational Advantages
The relay complies with standards IEC/EN 60947-5-1 and IEC/EN 61810-1, ensuring reliability and safety in operation. The integrated input protective circuit protects against voltage surges and increases service life. The LED indicator enables simple status monitoring. The high mechanical life of over 30 million switching operations ensures long-term operation without maintenance. The mounting options and compact design facilitate integration into existing systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001804
qrcode für Dold 0034040 coupling relay IK3076.11/004 230-240V