Dold 0033895, EAN: 4030641338954

Dold 0033895 IK8701.12 AC50HZ 42V relay

Dold 0033895 IK8701.12 AC50HZ 42V relay

Lieske Part No. 1002165
Mfg Part No 0033895
EAN-Code 4030641338954
Manufacturer Dold
Here only 55,18 EUR
65,66 EUR incl. VAT

Further information for Dold 0033895 IK8701.12 AC50HZ 42V relay

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.16 A
Width17,5 mm
TypeIK 8701
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping2 changeover contacts
Nominal voltageAC 42 V 50 Hz
The Dold switching relay IK8701.12 AC50HZ 42V is an industrial coupling relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for driving PLC systems or for controlling PLC-controlled loads. The device is designed for operation with alternating voltage and features a rated voltage of AC 42 V at 50 Hz. The contact configuration includes two changeover contacts, suitable for switching loads. The relay is housed in an installation distributor enclosure with a width of 17.5 mm, allowing it to be mounted in standard distributor boxes.

Applications
This relay is specifically designed for use in industrial plants, where it is employed for signal transmission and load control. It can be used, for example, to control lamp loads, particularly when parallel compensation is required, such as with HQ lamps. As an input coupling relay, it enables the connection of external control devices to a PLC, while as an output coupling relay, it controls loads via a PLC. The design also allows control via 2-wire initiators, with the permissible residual current being ≤ 3 mA.

Functions and Equipment in Detail
The device features a manual operation button on the front, which also serves as a switching position indicator. When energized, the button is pushed in, indicating the closed contact position. In the de-energized state, the black button aligns flush with the front edge, indicating the open contact position. The contacts are actuated via a toggle arm with a plunger; after the excitation voltage drops, the arm returns to its resting position via a spring. The contact configuration is limited to two changeover contacts, and the contacts are also suitable for switching small loads, although the gold plating may burn off at higher current levels.

Technology Explained Simply
The relay coil is supplied with control voltage AC 42 V 50 Hz via terminals A1/A2. The protective circuit at the coil input serves to suppress voltage spikes and protects the device against overvoltage. The thermal current Ith is a maximum of 16 A, indicating the maximum contact load capacity under continuous operation. The standard contact gap is 3 mm, with an optional gap of 6 mm available. The contacts are suitable for switching inductive loads, particularly with direct current loads having an L/R time constant of 30 ms.

Compatibility and Accessories
The relay is manufactured in accordance with standard EN 60947-5-1, ensuring compliance with safety and functional requirements for switching devices in industrial applications. It is designed for use in installation and control technology and can be mounted in distributor boxes with standard widths of 17.5 mm, 35 mm, or 52.5 mm. The connection terminals are designed for connecting loads, with contact designations (e.g., 11, 12, 14) defining the function (normally open, normally closed, changeover). The devices are designed for industrial environments, with mechanical actuation via the front button enabling manual control.

Mounting and Installation
The relay is mounted in an installation distributor, with the width of 17.5 mm determining the installation height in the distributor box. The connection terminals are designed for wiring, with the polarity of the control voltage (A1/A2) and load connection (e.g., 11, 12, 14) to be connected according to circuit diagrams. The manual operation button allows for easy testing of switching function, with the switching position indicator visually displaying the contact status. Mounting is carried out in standard distributor boxes, ensuring mechanical stability and electrical insulation.

Advantages in Operation
The relay offers high thermal load capacity with an Ith of 16 A, ensuring reliable performance under continuous operation. The protective circuit at the coil input increases the device’s service life. The manual operation button enables simple testing and manual control, with the switching position indicator visually signaling the operating status. The design is intended for industrial applications, with the contact configuration suitable for various load types. Compliance with standard EN 60947-5-1 ensures safety and reliability during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002165
qrcode für Dold 0033895 IK8701.12 AC50HZ 42V relay