Further information for Dold 0033893 IK8701.11 DC24V relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
16 A
Width
17,5 mm
Type
IK 8701
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 changeover contact
Nominal voltage
DC 24 V
The Dold switching relay IK8701.11 DC24V is an industrial relay for use in installation and control technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or switching loads, including lamp loads. The device features a contact configuration of one changeover contact and is designed for a rated voltage of DC 24 V. The width is 17.5 mm, making it suitable for use in standard installation distributors. The construction complies with the standard EN 60947-5-1, which defines requirements for switching devices for control gear and switching devices in electrical engineering.
Applications
This relay is designed for various applications in industrial and building automation. It can be used as an input coupling relay to forward signals from sensors or other control devices to a PLC. As an output coupling relay, it switches loads controlled by a PLC, such as lighting, motors, or electric valves. The IK8701.11 variant is specifically designed for switching lamp loads, with the contact configuration configured for one changeover contact. The maximum contact configuration for the IK 8701 device type is two changeover contacts, enabling flexible use in various switching configurations.
Functions and Equipment in Detail
The relay features a manual actuation button on the front, which also serves as a switching position indicator. When energized, the button is depressed, indicating the closed contact position. In the de-energized state, the black button is flush with the front edge, indicating the open contact position. The contacts are actuated by a folding armature with a plunger, which returns to the rest position via a spring after the excitation voltage is switched off. The maximum thermal current rating (Ith) is 16 A, enabling high load capacity under continuous operation. The protective circuit at the coil input protects the device against voltage spikes and reverse polarity.
Technology Explained Simply
The operation is based on an electromagnetic principle: when the rated voltage (DC 24 V) is applied, the armature is magnetically attracted, causing the plunger to actuate the contacts. The contacts switch the load circuit on or off. The reset is mechanical, achieved via a spring once the voltage is switched off. The protective circuit at the coil input suppresses switching surges and protects the relay from damage due to electrical overvoltage. The contact configuration with one changeover contact allows switching of two load circuits, where one contact closes and the other opens. The maximum contact count of two changeover contacts is available for the IK 8701 device type, with the exact configuration varying by model.
Compatibility and Accessories
The relay is designed for use in standard installation distributors and fits into widths of 17.5 mm. It can be operated with 2-wire initiators, with an allowable residual current ≤ 3 mA. Control is via terminals A1+ / A2, with polarity specified for DC devices. The switching function is designed for various load types, including inductive DC loads and lamps with parallel compensation (e.g., HQ lamps). The maximum parallel compensation is 100 μF. For DC devices, a freewheeling diode is integrated, serving as reverse polarity protection and suppressing switching surges.
Mounting and Installation
The relay is installed into an installation distributor, with the width of 17.5 mm enabling mounting in standard switchboards. The connection terminals are clearly labeled: A1+ / A2 for control voltage and contact numbers (11, 12, 14, etc.) for load connections. The manual actuation button allows manual testing of the switching function without electrical supply. Mounting is done by snapping into the distributor rail, with mechanical stability ensured by the design.
Advantages in Operation
The relay offers high reliability when switching loads, especially in industrial and automated environments. The integrated protective circuit at the coil input increases service life and protects against incorrect operation. The manual actuation button with switching position indicator simplifies maintenance and diagnostics. The high thermal current rating of 16 A enables use with loads requiring high continuous current. Compliance with EN 60947-5-1 ensures adherence to technical standards for control gear. The IK 8701 series offers various variants with different contact configurations and functions, allowing flexible adaptation to specific requirements.