Dold 0033885, EAN: 4030641338855

Dold 0033885 IK8701.01 DC24V relay

Dold 0033885 IK8701.01 DC24V relay

Lieske Part No. 1002158
Mfg Part No 0033885
EAN-Code 4030641338855
Manufacturer Dold
Here only 42,97 EUR
51,13 EUR incl. VAT

Further information for Dold 0033885 IK8701.01 DC24V relay

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.16 A
Width17,5 mm
TypeIK 8701
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping1 NO contact
Nominal voltageDC 24 V
The Dold switching relay IK8701.01 DC24V is an industrial coupling relay for use in control and automation technology. It serves as an input or output coupling relay, for example, for actuating PLC systems or switching loads controlled via a PLC. The device is designed for a nominal voltage of DC 24 V and features a contact configuration with one close contact. The maximum contact configuration is two changeover contacts, with a width of 17.5 mm. The relay is designed as an installation distributor and complies with the standard EN 60947-5-1.

Applications
This relay is specifically designed for use in industrial control systems. It is suitable for switching lamp loads, particularly in applications with parallel compensation, such as HQ lamps. As an input coupling relay, it can be used to actuate PLC systems, while as an output coupling relay, it controls loads operated via a PLC. The design also allows actuation via 2-wire initiators, with an allowable residual current ≤ 3 mA.

Functions and Features in Detail
The device features a manual actuation button on the front, which also serves as a position indicator. When the relay is energized, the button is depressed; when de-energized, it closes flush with the front edge. The contacts are actuated via a toggle armature and a plunger. After the excitation voltage drops, the armature is returned to its resting position by a spring. The contact gap for this variant is 3 mm. The relay is equipped with a protective circuit at the coil input, serving as reverse polarity protection and a freewheeling diode to suppress switching surges. The connection polarity is A2+.

Technology Explained Simply
The operation is based on an electromagnetic principle: when the nominal voltage (DC 24 V) is applied, the armature is attracted, causing the plunger to actuate the contacts. The contacts then switch the load. The protective circuit at the coil input protects the device against voltage errors and prevents voltage spikes when switching inductive loads via the freewheeling diode. The thermal current Ith is maximum 16 A, indicating the relay’s load capacity under continuous operation. The installation distributor design allows mounting in standard distributor enclosures.

Compatibility and Accessories
The relay is suitable for use in systems with 2-wire initiators, with actuation via terminals A1+ / A2. It can be combined with other devices from the IK-8701 series, which offer different contact configurations and functions, such as variants with a 6 mm contact gap or for switching large inductive DC loads. Combination with parallel compensation (up to 100 μF) is possible for lamp loads.

Mounting and Installation
The relay is mounted in standard installation distributor enclosures. The width of 17.5 mm allows for compact placement. The connection terminals are clearly labeled (A1, A2, 11, 12, 14, etc.) and enable unambiguous signal assignment. The manual actuation button allows for manual activation and visual control of the switching position.

Operational Advantages
The relay offers high thermal load capacity with an Ith of 16 A, ensuring reliable operation under continuous load conditions. The integrated protective circuit protects the device and connected loads from voltage surges. The manual actuation button enables easy diagnosis and manual control. The design is intended for industrial environments, with the standard EN 60947-5-1 defining safety and functional requirements. The width of 17.5 mm allows flexible integration into existing control systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002158
qrcode für Dold 0033885 IK8701.01 DC24V relay