| Technical data |
| Enclosure design | Distribution board |
| Output contacts | 1 C/O contact |
| Time function(s) | On-delay |
| Width | 17,5 mm |
| Type | IK 7813 |
| Variant |
| Contact equipping | 1 changeover contact |
| Nominal voltage | AC 220 - 240 V |
| Time range | 0,1 - 1 s |
The Dold time relay IK7813.81 AC220-240V 0,1-1S is a delayed-on relay for industrial and installation control applications. It is used for time-delayed activation of switching operations, with the delay adjustable between 0.1 and 1 second. The device is designed for use in installation and industrial distributors according to DIN 43880 and has a width of 17.5 mm, making it suitable for standard distributor enclosures. The rated voltage is AC 220 to 240 V, and the relay is designed for continuous operation.
Applications
This time relay is suitable for applications requiring a time-delayed switching function, for example, to delay the switching on of motors, lighting systems, or safety functions. It is used in industrial automation, building technology, and electrical distributors where precise and repeatable time control is required. The IK 7813 form factor is specifically designed for installation distributors, with connection terminals located at the bottom.
Functions and Equipment in Detail
The relay features a changeover contact (1 C/O contact) as the output contact, rated for a nominal operating voltage of AC 250 V. The contact materials consist of AgSnO₂, ensuring high switching capacity and long service life. The electrical life is at least 500,000 switching operations at 3 A and AC 230 V, while the mechanical life exceeds 30 million switching operations. An LED indicator signals the state of the output relay – it lights up when contact 15-18 is closed. The time setting is adjusted continuously on a relative scale, with changes taking effect immediately during the timing process. The repeat accuracy is ≤ 1 %, enabling high precision in repeated switching operations.
Technology Explained Simply
The delayed-on function means that the relay only closes the output contact after the set delay time (here 0.1 to 1 second) has elapsed. Power supply is via the rated voltage AC 220–240 V, with a voltage range tolerance of 0.8 to 1.1 times the rated voltage. The drop-out voltage is 15 % of the rated voltage, ensuring safe deactivation of the relay. The reset time (tw) is < 60 ms, which is very short, allowing the device to be quickly available for the next switching operation. The temperature dependence of the timing function is 0.05 % per Kelvin, ensuring stable performance over a wide temperature range.
Compatibility and Accessories
The device is available in the IK 7813 form factor, designed for installation distributors with terminals located at the bottom. An alternative SK 7813 form factor with terminals at the top for enclosures is also available in the range, but is not part of this article. The use of fuses with a maximum of 10 A gG/gL or circuit breakers with B16 tripping characteristics is recommended to ensure short-circuit resistance. The switching capacity according to AC 15 is 10 A for closing contacts and 5 A for opening contacts at AC 230 V.
Mounting and Installation
The relay is mounted in standard installation distributors according to DIN 43880. The width of 17.5 mm allows installation in typical distributor enclosures. The connection terminals are located at the bottom, enabling easy wiring. The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is from -25 °C to +70 °C. The relative humidity may reach up to 95 % at 40 °C. The operating altitude is limited to a maximum of 2000 m above sea level.
Advantages in Operation
The high repeat accuracy and short reset time enable reliable and precise control. The LED indicator provides visual feedback on the switching state, simplifying maintenance and fault diagnosis. The robust construction with a mechanical life exceeding 30 million switching operations ensures a long service life. Compliance with standard EN 61812-1 guarantees the safety and reliability of the device. The protection rating IP 40 protects the housing against finger contact and against solid objects, while the connection terminals have a protection rating of IP 20.