Dold 0033572, EAN: 4030641335724

Dold 0033572 AK9840.82 3AC50/60Hz 660V asymmetrical relay

Dold 0033572 AK9840.82 3AC50/60Hz 660V asymmetrical relay

Lieske Part No. 1000461
Mfg Part No 0033572
EAN-Code 4030641335724
Manufacturer Dold
Here only 669,51 EUR
796,72 EUR incl. VAT

Further information for Dold 0033572 AK9840.82 3AC50/60Hz 660V asymmetrical relay

Technical data
1- / 3-phase3
Enclosure designSwitch cabinet
Measuring range max.3 AC 690 V
Output contacts2 C/O contacts
Standard measuring range3 AC 400 V
Width70 mm
TypeAK 9840
Operate delayYes
Variant
Contact equipping2 changeover contacts
Nominal voltage3AC 660 V 50/60 Hz
The AK9840.82 asymmetry relay from Dold is a monitoring device for three-phase networks, detecting voltage asymmetry, undervoltage, phase failure, and incorrect phase sequence. It is designed for nominal voltages of 3 AC 660 V at 50/60 Hz and serves to ensure operational safety in industrial installations. The device operates on the standstill current principle, where the output relay is activated during normal operation and deactivated in case of faults.

Applications
This relay is suitable for monitoring three-phase networks in industrial environments, particularly in installations with thyristor systems, automatic reactive power compensation systems, or emergency power supplies that exhibit high harmonic content. It can also be used for automatic switching to battery-powered emergency lighting when the network voltage drops by 30 %, in accordance with VDE 0108. The application also includes networks with a neutral conductor, although the N terminal is not required; in this case, the nominal voltage must be converted to the line-to-line voltage.

Functions and Equipment in Detail
The device detects voltage asymmetry by measuring the difference between two voltages, meaning it does not respond to symmetrical voltage drops as long as the undervoltage detection threshold of 0.7 U_N is not exceeded. The response delay is continuously adjustable within a range of 0.5 to 5 seconds. In the case of incorrect phase sequence, tripping occurs immediately. Reverse voltage detection is also integrated and recognizes reverse voltages up to 100 % minus the set asymmetry value. The LED indicator signals the contact position: when the output relay is activated, the LED lights up; in case of faults, it turns off.

Technology Explained Simply
Measurement is performed by arithmetic averaging of the three phase voltages. The device responds to asymmetric voltage changes caused by uneven network loading or the failure of a line conductor. The adjustment ranges include voltage asymmetry from 5 to 20 % of the nominal voltage. The reset hysteresis is fixed at 0.98. The frequency range coverage is ±5 % for 50 Hz and ±10 % for 60 Hz, with measurement taking up to 1.5 seconds during voltage changes. The nominal power consumption is a maximum of 7.1 VA.

Compatibility and Accessories
The relay is available for nominal voltages in the range of 3 AC 110 to 690 V, with the variant specified here being 3 AC 660 V. It is certified according to IEC/EN 60255-1. The contact configuration includes two changeover contacts, suitable for controlling auxiliary circuits or contactors. The width is 70 mm, allowing installation in standard enclosures. The housing design is intended for use in enclosures.

Mounting and Installation
Mounting is carried out in an enclosure. The terminals L1, L2, and L3 are used to connect to the three-phase network to be monitored. The output contacts 15-16, 15-18, 25-26, and 25-28 enable control of auxiliary circuits. The LED indicator is directly integrated into the device and shows the status of the output relay. The settings for asymmetry and response delay are adjusted using the designated adjustment options on the device.

Operational Advantages
Early detection of impending failures enables preventive maintenance and prevents costly damage. Continuous monitoring ensures high system availability. Simple installation without auxiliary voltage reduces wiring effort. Robustness against harmonics makes the device suitable for demanding industrial applications. The clear status indication via LED facilitates diagnosis during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1000461
qrcode für Dold 0033572 AK9840.82 3AC50/60Hz 660V asymmetrical relay