Further information for Dold 0033515 IK3076.11 AC/DC12V coupling relay
Technical data
Enclosure design
Distribution board
Output contacts max.
2 C/O contacts
Thermal current Ith max.
10 A
Width
17,5 mm
Type
IK 3076
Initiator triggering
Suppressor circuit on the coil input
Variant
Contact equipping
1 changeover contact
Nominal voltage
AC/DC 12 V
The IK3076.11 AC/DC12V coupling relay from Dold is an industrial component for contact multiplication and serves as an interface between control and power circuits. It enables potential isolation and is specifically designed for applications in industry and railway systems. The device features a contact configuration with 1 changeover contact and is rated for a nominal voltage of AC/DC 12 V. The width is 17.5 mm, making it suitable for use in installation and industrial distributors according to DIN 43880. The housing design is configured as an installation distributor, with connection terminals arranged at the bottom. Mounting is possible either on DIN rails (IEC/EN 60715) or via screw fastening with M4 screws on a 90 mm grid.
Applications
The IK3076.11 coupling relay is intended for use in industrial control systems where galvanic isolation between control and power circuits is required. It is frequently used in automation technology systems, manufacturing industries, and railway installations where reliable signal transmission and contact multiplication are necessary. The configuration with 1 changeover contact ensures safe isolation in accordance with IEC/EN 61140 and IEC/EN 60947-1, which is critical for applications with high safety requirements.
Functions and Equipment in Detail
The device features an LED indicator, which lights green when the relay is energized, enabling visual monitoring of the operating status. The coil is equipped with input protection circuitry that protects against voltage surges and increases the relay’s service life. Integrated initiator actuation allows control via external signals. The contact configuration with 1 changeover contact enables control of a load circuit via a normally open and a normally closed contact, providing flexible signal transmission.
Technology Explained Simply
The thermal current Ith max. 10 A indicates the maximum continuous current the contacts can carry without causing thermal damage. The pickup and drop-out times are less than 10 ms and less than 20 ms respectively, enabling rapid response to control signals. The relay is designed for continuous operation and can be used at operating temperatures from -25 °C to +60 °C. The mechanical life exceeds 30 million switching operations, indicating high robustness. The electrical life is 100,000 switching operations at 3 A and AC 230 V, demonstrating high reliability in industrial applications.
Compatibility and Accessories
The coupling relay is available in various variants, including models with 2 changeover contacts (IK3076.12), enabling higher contact multiplication. The nominal voltage varies by model and may be AC/DC 8, 12, 24, 48 V or AC 110–130 V and 230–240 V. The connection terminals are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule DIN 46228-1/-2/-3/-4). The stripping length is 10 mm, and the tightening torque for the terminals is 0.8 Nm.
Mounting and Installation
Mounting is either on a DIN rail in accordance with IEC/EN 60715 or via screw fastening with M4 screws. The depth is 59 mm, allowing installation in standard distributors. The terminals are arranged at the bottom, facilitating cable connection in the lower area of the distributor. Terminal identification follows EN 50005, with A1 and A2 representing coil inputs and 11, 12, 14 representing contacts of the first changeover contact.
Operational Advantages
The IK3076.11 coupling relay offers high operational safety due to the integrated input protection circuitry and galvanic isolation. The LED indicator enables quick diagnosis of the operating status. The high mechanical and electrical life, along with the high thermal current Ith of 10 A, make the device suitable for demanding industrial applications. Compliance with standards IEC/EN 60947-5-1 and IEC/EN 61810-1 ensures conformity with international standards. EMC testing in accordance with IEC/EN 61000-4-2 to -4-6 and radio frequency interference suppression according to EN 55011 Class B ensure electromagnetic compatibility and immunity.
Protection Rating and Environmental Conditions
The relay housing has a protection rating of IP 40, protecting against finger contact and solid objects larger than 1 mm. The terminals are protected to IP 20, safeguarding against tool contact and solid objects larger than 12.5 mm. The device is designed for operation at altitudes up to 2000 m above sea level. Storage temperature ranges from -40 °C to +80 °C. Vibration resistance is specified at an amplitude of 0.35 mm at frequencies from 10 to 55 Hz, ensuring suitability for use in vibrating environments.
Technical Standards and Approvals
The device complies with standards IEC/EN 60947-5-1 (switchgear for switchgear systems), IEC/EN 61810-1 (relays), IEC/EN 61140 (safe isolation), and IEC/EN 60947-1 (general requirements). The rated impulse voltage is 6 kV for input and output in the IK3076.11 variant. Creepage and clearance distances meet the requirements of IEC 60664-1. Radio frequency interference suppression is performed in accordance with EN 55011 Class B, ensuring electromagnetic compatibility in industrial environments.