| Technical data |
| Enclosure design | Distribution board |
| Output contacts | 1 C/O contact |
| Time function(s) | On-delay |
| Width | 17,5 mm |
| Type | IK 7813 |
| Variant |
| Contact equipping | 1 changeover contact |
| Nominal voltage | AC/DC 24 V |
| Time range | 1 - 10 s |
The Dold time relay IK7813.81 AC/DC24V 1-10S is a delayed-activation relay for use in installation and industrial distribution systems. It is designed for time-controlled switching of electrical loads, with the output contact switching only after a set delay time. The device is rated for a nominal voltage of AC/DC 24 V and features a contact configuration with one changeover contact. The delay time is continuously adjustable within a range of 1 to 10 seconds, with a repeatability of ≤ 1 %. The module width of 17.5 mm allows for compact mounting in standard distribution boxes according to DIN 43880.
Applications
This relay is suitable for applications in industrial automation, building technology, and electrical distribution systems where a time-delayed switching function is required. Typical applications include delaying motor start-up, ensuring correct switching sequences, or avoiding short-circuit currents during load commissioning. The IK 7813 housing design is specifically intended for installation distributors, with a depth of 58 mm and connection terminals located at the bottom.
Functions and Features in Detail
The device includes an LED indicator that visually signals the state of the output relay — the LED lights up when contact 15–18 is closed. The time setting is continuously adjustable on a relative scale, with changes taking effect immediately during the timing process. This allows for flexible adjustment of the delay time during operation. The contact reset time is less than 20 ms, ensuring a rapid response during switching-off operations. The contact materials are made of AgSnO₂, providing high switching durability and low wear.
Technology Explained Simply
The delayed-activation function means that the relay only switches the output contact after the set time has elapsed. This is useful, for example, to introduce a short delay during machine start-up, minimizing mechanical or electrical stress. The nominal voltage of AC/DC 24 V is a common voltage in automation technology. The repeatability of ≤ 1 % ensures reliable and reproducible time control. The operating temperature range is between -20 °C and +60 °C, allowing use in a wide range of environments.
Compatibility and Accessories
The relay is designed in the IK 7813 housing format for installation distributors according to DIN 43880. It can be used in combination with other components from the Dold MINITIMER program, particularly in systems requiring time-controlled switching. The connection terminals are designed for secure connections with wiring. The switching capacity is up to 10 A at AC 230 V (make contact) and 5 A (break contact), which is sufficient for many industrial applications. Maximum short-circuit withstand is ensured by a maximum fuse rating of 10 A gG/gL or a circuit breaker with B16 tripping characteristic.
Mounting and Installation
Mounting is carried out in standard installation distribution boxes with a depth of 58 mm. The connection terminals are located at the bottom of the device, enabling easy wiring. The module width of 17.5 mm corresponds to the standard for modular components in distribution systems. The devices are designed for continuous operation and can be operated in environments with up to 95 % relative humidity at 40 °C. The operating altitude is limited to a maximum of 2000 m above sea level.
Advantages in Operation
The high repeatability and continuous time adjustment enable precise and flexible control. The LED indicator provides visual feedback on the operating status, simplifying maintenance and troubleshooting. The robust construction with an IP 40 protection rating for the housing and IP 20 for the terminals ensures reliable performance in industrial environments. The mechanical life exceeds 30 million switching operations, enabling long-term operation without maintenance.