Dold 0033209, EAN: 4030641332099

Dold 0033209 IK3076.11 coupling relay 230-240V AC50/60Hz

Dold 0033209 IK3076.11 coupling relay 230-240V AC50/60Hz

Lieske Part No. 1001801
Mfg Part No 0033209
EAN-Code 4030641332099
Manufacturer Dold
Here only 60,99 EUR
72,58 EUR incl. VAT

Further information for Dold 0033209 IK3076.11 coupling relay 230-240V AC50/60Hz

Technical data
Enclosure designDistribution board
Output contacts max.2 C/O contacts
Thermal current Ith max.10 A
Width17,5 mm
TypeIK 3076
Initiator triggeringYes
Suppressor circuit on the coil inputYes
Variant
Contact equipping1 changeover contact
Nominal voltageAC 230 - 240 V
The coupling relay IK3076.11 from Dold is an industrial component for contact multiplication and serves as a link between control and power circuits. It is specifically designed for applications in industry and railway sectors, where safe potential isolation and reliable signal transmission are required. The device features a contact configuration with 1 changeover contact and is rated for a nominal voltage of AC 230–240 V. The width is 17.5 mm, making it suitable for use in standardized installation and industrial distributors according to DIN 43880. The housing design is an installation distributor, with terminal connections at the bottom and a depth of 59 mm. Mounting is either on DIN rail (IEC/EN 60715) or by screw mounting with M4 screws on a 90 mm pitch.

Applications

The coupling relay IK3076.11 is used in control systems where it transmits signals from control devices to multiple loads or switching devices. It is particularly suitable for applications requiring galvanic isolation between control and power circuits, such as in automation systems, drive technology, or safety controls. The configuration with one changeover contact enables potential separation in accordance with IEC/EN 61140 and IEC/EN 60947-1, which is important for safety-critical installations.

Functions and Equipment in Detail

The device features an LED indicator, which lights green when the relay is energized, enabling visual monitoring of the operating status. The initiator actuation is integrated, allowing control via external signals. The coil is equipped with input protection circuitry, which protects against voltage surges and increases the reliability of the device. The nominal frequency is 50/60 Hz, with a frequency range of ±5 %, allowing flexible adaptation to various network conditions.

Technology Explained Simply

The thermal current Ith is maximum 10 A, indicating the maximum continuous load capacity of the contacts. The switching capacity according to AC 15 is 3 A for the make contact and 1 A for the break contact at AC 230 V. For direct current (DC 13), the switching capacity is 1 A for both make and break contacts at DC 24 V. The electrical life expectancy is 100,000 switching operations at 3 A and AC 230 V, while the mechanical life exceeds 30 million switching operations. The pickup time is under 10 ms, and the drop-out time is under 20 ms, ensuring a rapid response to control signals. The permissible switching frequency is 6000 switching operations per hour.

Compatibility and Accessories

The coupling relay is available in various versions, including the model with 2 changeover contacts (IK3076.12), which enables higher contact multiplication. The terminal connections are designed for conductor cross-sections of 2 x 2.5 mm² (solid) or 2 x 1.5 mm² (stranded wire with ferrule DIN 46228-1/-2/-3/-4). The stripping length is 10 mm. Conductor fixation is achieved via flat terminals with self-lifting connection washers (IEC/EN 60999-1), with a tightening torque of 0.8 Nm. Device fixation is via snap mounting on DIN rail or screw mounting.

Mounting and Installation

Mounting is either on a DIN rail (IEC/EN 60715) or by screw mounting with M4 screws on a 90 mm pitch. The depth of 59 mm and bottom-mounted terminals are designed for installation and industrial distributors according to DIN 43880. The operating temperature range is from -25 °C to +60 °C, and the storage temperature range is from -40 °C to +80 °C. The operating altitude is limited to ≤ 2000 m. The housing is made of thermoplastic with V0 flammability rating according to UL Subj. 94, ensuring a high level of flame resistance.

Operational Advantages

The coupling relay IK3076.11 complies with standards IEC/EN 60947-5-1 and IEC/EN 61810-1, ensuring reliability and safety in operation. The integrated input protection circuitry protects against transient voltage surges. The LED indicator enables simple status monitoring. The high mechanical life and robust construction ensure long operational life with minimal maintenance. The galvanic isolation with one changeover contact meets the requirements for safe separation according to IEC/EN 61140 and IEC/EN 60947-1, which is important for safety-critical applications. The housing protection rating is IP 40, and the terminals are rated IP 20, providing sufficient protection against contact and dust. The EMC coverage includes immunity to electrostatic discharge (8 kV), high-frequency radiation (up to 10 V/m), and fast transients (2 kV), ensuring reliability in electromagnetically demanding environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1001801
qrcode für Dold 0033209 IK3076.11 coupling relay 230-240V AC50/60Hz