Dold 0032823, EAN: 4030641328238

Dold 0032823 time relay delayed release 115V

Industrial Material > Industrial relays and contactors > Industrial Timers

Dold 0032823 time relay delayed release 115V

Lieske Part No. 1583538
Mfg Part No 0032823
EAN-Code 4030641328238
Manufacturer Dold
Here only 351,73 EUR
418,56 EUR incl. VAT

Further information for Dold 0032823 time relay delayed release 115V

Technical data
Enclosure designFront panel mounting
Output contacts1 C/O contact
Time function(s)Off-delay, with control signal
Width72 mm
TypeEF 7666
Variant
Contact equipping1 changeover contact delayed, 1 changeover undelayed
Nominal voltageAC 115 V
Time range0,2 s - 60 h
The Dold time relay EF7666.32 is a delayed-release industrial time relay for front panel mounting, designed for a rated voltage of AC 115 V at a frequency of 50/60 Hz. It is used for time-delayed control of electrical systems and devices, particularly to account for the coast-down behavior of motors or other system components. The time delay occurs after switching off the control signal, with the contacts only switching after the set time has elapsed. The device has a width of 72 mm and is designed for installation in standard control panels.

Applications
This time relay is suitable for applications in industrial automation where precise, time-controlled switching off is required. Typical applications include controlling fans, pumps, or lighting systems where immediate switching off is not desired. The delayed release allows, for example, motors to be switched off gradually, reducing mechanical stress. Use in production plants, machine building, or building technology is common.

Functions and Equipment in Detail
The device features contact configuration with one delayed changeover contact and one instantaneous changeover contact. The delayed contacts switch only after the set time has elapsed, while the instantaneous contacts react immediately when the control signal is applied. The time delay can be adjusted continuously within a range of 0.2 seconds to 60 hours. This wide adjustment range is achieved through six switchable time ranges, selected via a rotary switch on the front. Repeatability is ≤ ± 0.5 % of the scale end value, with a permissible deviation of ≤ ± 1 % in the 3 and 6 second ranges. A time progress indicator enables visual monitoring of the timing process.

Technology Explained Simply
The time control is purely mechanical, ensuring high reliability and independence from electronic components. The delay is generated by a mechanical timing mechanism, controlled via a continuously adjustable rotary switch. The contacts are made of AgNi with a gold layer of 0.2 μm, ensuring high switching capacity and long service life. The response time of the contacts is less than 35 ms, and the release time is less than 60 ms. The device is voltage-loss-safe, meaning it returns to its default position when the supply voltage is interrupted.

Compatibility and Accessories
The time relay is designed for use in control panels with a front surface of 72 x 72 mm. It is compatible with standard plug connectors and can be integrated into existing control systems. The rated voltage of AC 115 V is common for many industrial applications. The contact configuration with one delayed and one instantaneous changeover contact enables flexible switching configurations. The switching capacity according to AC 15 is 3 A at AC 230 V, with an electrical service life of at least 100,000 switching operations at 3 A and AC 230 V. The mechanical service life exceeds 30 million switching operations or 15,000 operating hours.

Mounting and Installation
The device is installed into a front panel with a 72 mm wide opening. Mounting is done by inserting it into the designated cutout and securing with screws. The connection terminals are designed for wiring. The time delay is adjusted via the front-mounted rotary switch, with the scale enabling precise setting. The switching position indicator shows the current state of the contacts. The front of the device is protected against spraying water and meets protection class IP 65, allowing use in outdoor or damp environments.

Advantages in Operation
The purely mechanical time control offers high reliability and is independent of electronic components. The continuous adjustment of the delay time over a wide range from 0.2 seconds to 60 hours allows flexible adaptation to different requirements. The switching position indicator and time progress indicator facilitate commissioning and maintenance. Voltage-loss safety ensures safe reset in case of power failure. The IP 65 protection class ensures safe operation in damp or dusty environments.

Functions and Equipment in Detail
The device features contact configuration with one delayed changeover contact and one instantaneous changeover contact. The delayed contacts switch only after the set time has elapsed, while the instantaneous contacts react immediately when the control signal is applied. The time delay can be adjusted continuously within a range of 0.2 seconds to 60 hours. This wide adjustment range is achieved through six switchable time ranges, selected via a rotary switch on the front. Repeatability is ≤ ± 0.5 % of the scale end value, with a permissible deviation of ≤ ± 1 % in the 3 and 6 second ranges. A time progress indicator enables visual monitoring of the timing process.

Technology Explained Simply
The time control is purely mechanical, ensuring high reliability and independence from electronic components. The delay is generated by a mechanical timing mechanism, controlled via a continuously adjustable rotary switch. The contacts are made of AgNi with a gold layer of 0.2 μm, ensuring high switching capacity and long service life. The response time of the contacts is less than 35 ms, and the release time is less than 60 ms. The device is voltage-loss-safe, meaning it returns to its default position when the supply voltage is interrupted.

Compatibility and Accessories
The time relay is designed for use in control panels with a front surface of 72 x 72 mm. It is compatible with standard plug connectors and can be integrated into existing control systems. The rated voltage of AC 115 V is common for many industrial applications. The contact configuration with one delayed and one instantaneous changeover contact enables flexible switching configurations. The switching capacity according to AC 15 is 3 A at AC 230 V, with an electrical service life of at least 100,000 switching operations at 3 A and AC 230 V. The mechanical service life exceeds 30 million switching operations or 15,000 operating hours.

Mounting and Installation
The device is installed into a front panel with a 72 mm wide opening. Mounting is done by inserting it into the designated cutout and securing with screws. The connection terminals are designed for wiring. The time delay is adjusted via the front-mounted rotary switch, with the scale enabling precise setting. The switching position indicator shows the current state of the contacts. The front of the device is protected against spraying water and meets protection class IP 65, allowing use in outdoor or damp environments.

Advantages in Operation
The purely mechanical time control offers high reliability and is independent of electronic components. The continuous adjustment of the delay time over a wide range from 0.2 seconds to 60 hours allows flexible adaptation to different requirements. The switching position indicator and time progress indicator facilitate commissioning and maintenance. Voltage-loss safety ensures safe reset in case of power failure. The IP 65 protection class ensures safe operation in damp or dusty environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1583538
qrcode für Dold 0032823 time relay delayed release 115V