| Technical data |
| Enclosure design | Distribution board |
| Output contacts | 1 C/O contact |
| Time function(s) | On-delay |
| Width | 17,5 mm |
| Type | IK 7814 |
| Variant |
| Contact equipping | 1 changeover contact |
| Nominal voltage | AC 220 - 240 V |
| Time range | 0,25 - 640 s |
| Variant | 4 time ranges can be programmed via the terminals |
The Dold time relay IK7814.81 is a delayed-actuation relay for industrial control applications, designed for a rated voltage of AC 220 to 240 V. It features a contact configuration with one changeover contact and enables a time delay in the range of 0.25 to 640 seconds. The width is 17.5 mm, making it ideal for integration into standard installation distributors according to DIN 43880. The housing design is intended for use in installation distributors, with a depth of 58 mm and bottom-mounted connection terminals.
Applications
This relay is suitable for time-controlled switching operations in industrial and technical systems, for example, to delay the switching on of motors, pumps, or lighting systems. It is used in systems where precise, repeatable time delays are required, such as in production lines, automation systems, or building automation. The repeat accuracy of ≤ 1 % ensures high reliability during repeated switching operations.
Functions and Features in Detail
The device has four programmable time ranges, which can be set externally via terminals Z3, Z4, and Z5. The time delay is continuously adjustable on a relative scale. An LED indicator shows the state of the output relay – it lights up when contact 15–18 is closed. Terminals Z3, Z4, and Z5 are not galvanically isolated from connection terminals A1/A2, which must be considered during installation. The reset time is less than 60 ms at 50/100 Hz.
Technology Explained Simply
The relay operates according to standard EN 61812-1 and is designed for continuous operation. The input voltage range is 0.8 to 1.1 times the rated voltage (AC 220–240 V), with voltage influence values ≤ 1 %. The temperature dependence is 0.05 % per Kelvin, enabling stable operation even with temperature fluctuations during operation from -20 °C to +60 °C. The contact materials consist of AgSnO₂, ensuring high switching durability and corrosion resistance.
Compatibility and Accessories
The relay is available in two housing types: IK 7814 for installation distributors and SK 7814 for enclosures with mounting plate and cable duct. The SK version has a greater depth of 98 mm and top-mounted terminals. The switching capacity is 10 A at AC 230 V for the make contact and 5 A at AC 230 V for the break contact. The electrical life is 500,000 switching operations at 3 A and AC 230 V. The mechanical life exceeds 30 million switching operations.
Mounting and Installation
Mounting is carried out in standard installation distributors according to DIN 43880. The bottom-mounted connection terminals allow for easy wiring. The maximum fuse rating is 10 A gG/gL, and the use of a circuit breaker with B16 tripping characteristic is permitted. The operating altitude is limited to a maximum of 2000 m above sea level.
Advantages in Operation
The precise time control with high repeat accuracy and the robust design with long service life make this relay a reliable component in industrial control systems. The LED indicator simplifies diagnosis and maintenance. Compliance with standard EN 61812-1 and EMC testing according to IEC/EN 61000-4-2 to -4-6 ensures safe and interference-free operation in electrical installations.