Dold 0031465, EAN: 4030641314651

Dold 0031465 IK8805.01AC50HZ24V remote switch

Installation > Modular devices / equipment installation > Impulse switch / relay

Dold 0031465 IK8805.01AC50HZ24V remote switch

Lieske Part No. 326832
Mfg Part No 0031465
EAN-Code 4030641314651
Manufacturer Dold
Here only 99,74 EUR
118,69 EUR incl. VAT

Further information for Dold 0031465 IK8805.01AC50HZ24V remote switch

Technical data
Output contacts max.4 C/O contacts
Thermal current Ith16 A
Width17,5 mm
TypeIK 8805
For top hat rail mountingYes
Variant
Contact equipping1 NO contact
Nominal voltageAC 24 V
The Dold impulse switch IK8805.01AC50HZ24V is a remote switch for central switching on and off of multiple consumer groups in electrical installations. It is used as a plug-in device for DIN rail mounting and is specifically designed for use in systems with room switches, where multiple switching points are controlled via a central switch. The device operates in impulse mode, which keeps energy consumption low, and enables a compact installation with reduced wiring effort. The width is 17.5 mm, making it suitable for use in narrow enclosures.

Applications
This impulse switch is intended for use in electrical installations in the field of building automation and central switching technology. It is commonly used in residential and commercial buildings to centrally control lighting, heating, or other electrical consumers via multiple room switches. The switching function is triggered by a control signal input via room switches (RT) or central switches (ZE/ZA). The application is for indoor use only, as the housing has protection rating IP 30, which protects against contact with moving parts, but is not suitable for outdoor use.

Functions and Equipment in Detail
The switch features contact configuration with one normally open (1 NO) contact and is designed for a rated voltage of AC 24 V. The maximum contact configuration for the IK 8805 model is up to four changeover contacts, while the variant described here provides only one normally open contact. The contacts are rated for an output voltage of AC 230 V or 400 V and can switch up to 2000 W of incandescent lamp load. The switching capacity for fluorescent lamps is 20 lamps at 58 W each per contact, with dual switching (series-compensated) allowing two such groups per contact. The electrical life is 50,000 switching operations, and the mechanical life is 200,000 switching operations.

Technology Explained Simply
The impulse operation means the switch is activated for a short time (minimum 50 ms) to operate the contact. This reduces energy consumption and allows a high switching frequency of up to 1000 switching operations per hour. The response time is under 30 ms, ensuring fast and reliable switching operations. The switching position indicator enables visual monitoring of the switching state. A manual button allows manual actuation of the contacts, which is useful for maintenance or in case of malfunction. The maximum neon lamp load is 4 mA, with up to 8 neon lamps (0.5 mA each) operable via room switches and up to 5 neon lamps (0.5 mA each) via central switches.

Compatibility and Accessories
The switch is compliant with IEC/EN 60 669 and can be used in systems with room switches and central switches. The connection terminals conform to EN 50000 standards. Terminal markings are designated as A1 (control signal L or DC+), A2 (neutral conductor N), ZE (central switch ON), ZA (central switch OFF), and output contacts 13/14, 23/24, 33/34, 43/44 for normally open contacts, and 11/12/14, 21/22/24, 31/32/34, 41/42/44 for changeover contacts. The maximum short-circuit withstand requires, if necessary, a preceding fuse with a rated current of 16 A (type gG/gL according to IEC/EN 60947-5-1).

Mounting and Installation
The impulse switch is designed for mounting on a DIN rail (DIN rail construction). The width of 17.5 mm allows for compact placement in enclosures. The operating temperature range is from -20 °C to +45 °C, and the storage temperature range is from -25 °C to +55 °C. The operating altitude is limited to below 2000 m. The terminals are protected to IP 20, and the housing to IP 30.

Operational Advantages
The impulse operation ensures low energy consumption and allows for high switching frequency. Central control of multiple consumer groups via room switches reduces wiring effort. The switching position indicator and manual button improve operability and maintainability. Compliance with IEC/EN 60 669 ensures reliability and safety in use. The thermal current rating (Ith) is 16 A, enabling high load capacity under continuous operation (in case of malfunction).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/326832
qrcode für Dold 0031465 IK8805.01AC50HZ24V remote switch