Dold 0031157, EAN: 4030641311575

Dold 0031157 IK8805.11AC50HZ230V remote switch

Industrial Material > Control devices / Pilot devices > Breakers and disconnectors

Dold 0031157 IK8805.11AC50HZ230V remote switch

Lieske Part No. 750819
Mfg Part No 0031157
EAN-Code 4030641311575
Manufacturer Dold
Here only 102,02 EUR
121,40 EUR incl. VAT

Further information for Dold 0031157 IK8805.11AC50HZ230V remote switch

Technical data
Output contacts max.4 C/O contacts
Thermal current Ith16 A
Width17,5 mm
TypeIK 8805
For top hat rail mountingYes
Variant
Contact equipping1 changeover contact
Nominal voltageAC 230 V
The Dold IK8805.11AC50HZ230V is a remote switch for central switching of multiple consumer groups in industrial and commercial installations. The device serves as a surge switch and enables control of loads via room switches, with operation performed through a central switch. It is designed for use in electrical installations where central switching functionality across multiple locations is required, for example in office buildings, production halls or lighting systems.

Applications
The remote switch is suitable for applications requiring central control of electrical loads via multiple room switches. It is frequently used in buildings with multiple rooms or in production environments where central switching is needed for lighting, heating or other consumer groups. The reduced wiring requirement in installations with multiple room switches reduces installation effort and simplifies maintenance.

Functions and Equipment in Detail
The device features contact configuration with one changeover contact (C/O contact), enabling it to switch loads and maintain a state. The rated voltage is AC 230 V, and the maximum contact configuration can include up to four changeover contacts, although the current variant includes only one. The switching position indicator allows visual monitoring of the switch state. An integrated manual operation button enables manual actuation of the contacts. The neon lamp load is up to 4 mA, with up to 8 neon lamps (each 0.5 mA) controllable via room switches and up to 5 neon lamps (each 0.5 mA) via central switches.

Technology Explained Simply
The remote switch operates in impulse mode, keeping energy consumption low. The impulse power is 11 W, and the minimum switching time is over 50 ms. The response time is less than 30 ms, ensuring rapid reaction to actuation. The rated frequency is 50 or 60 Hz, with a frequency range of ±5 %. The electrical life is 50,000 switching cycles, and the mechanical life is 200,000 switching cycles. The permissible switching frequency is 1000 switching cycles per hour. The device is designed for operating temperatures from -20 °C to +45 °C and can be stored at temperatures from -25 °C to +55 °C. The operating altitude is limited to below 2000 m.

Compatibility and Accessories
The remote switch is compliant with IEC/EN 60 669 and designed for mounting on a DIN rail. The width is 17.5 mm, making it suitable for compact installations. Switching capacities under lamp load include a tungsten filament lamp load of 2000 W and a fluorescent lamp load of 20 lamps at 58 W each per contact. In dual switching (series-compensated), 2 x 20 lamps at 58 W each per contact can be switched. The rated switching capacity is 16 A at AC 230 V with a power factor from 1 to 0.7. Short-circuit withstand requires a maximum fuse of 16 A gG / gL according to IEC/EN 60947-5-1.

Mounting and Installation
Mounting is on a DIN rail, with the width of 17.5 mm enabling compact placement. Terminal marking follows EN 50000, where A1 is the control signal (L or DC+) and A2 is the neutral conductor (N). Central switches are marked as ZE (ON) and ZA (OFF). Output contacts are defined as make contacts (13/14, 23/24, etc.) and changeover contacts (11/12/14, 21/22/24, etc.). Installation requires no special tools, and wiring is done via the designated terminals.

Operational Advantages
The impulse mode ensures low energy consumption and reduces heat generation. The switching position indicator enables quick visual state monitoring. The reduced wiring requirement in installations with multiple room switches reduces installation effort and failure susceptibility. The high mechanical and electrical life ensures reliable long-term use. Compliance with IEC/EN 60 669 ensures adherence to safety and functional requirements.

Protection Rating and Environmental Conditions
The housing has a protection rating of IP 30, protecting against contact with moving parts and solid foreign objects larger than 2.5 mm. The terminals are protected to IP 20, protecting against finger contact and solid foreign objects larger than 12.5 mm. The housing is made of thermoplastic with V0 behaviour according to UL Subj. 94, indicating a high flame retardant class. Vibration resistance is 0.35 mm amplitude at 10 to 55 Hz according to IEC/EN 60068-2-6. Climatic resistance corresponds to the damp heat test according to IEC/EN 60068-2-30.

EMC and Safety Requirements
The device meets electromagnetic compatibility (EMC) requirements according to IEC/EN 61000-4-2 to -4-6. Static discharge is 8 kV (air discharge), high-frequency radiation is 10 V/m in the range of 80 MHz to 2.7 GHz, and fast transients are 4 kV. Surge voltage is 1 kV between supply lines and 2 kV between line and earth. Radio frequency interference complies with Class B limits according to EN 55011. Creepage and clearance distances correspond to a rated surge voltage of 4 kV and a pollution degree of 2 according to IEC 60664-1.

Terminal Connections and Signal Description
Terminal marking follows EN 50000. A1 denotes the control signal (L or DC+), A2 denotes the neutral conductor (N). ZE (central switch ON) and ZA (central switch OFF) are used for actuation. Output contacts are defined as make contacts (13/14, 23/24, etc.) and changeover contacts (11/12/14, 21/22/24, etc.). Load connections are made via the respective terminals, with the changeover configuration allowing loads to be switched and maintained in a state.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/750819
qrcode für Dold 0031157 IK8805.11AC50HZ230V remote switch