Further information for Dold 0030758 BA9037.12/001AC/DC24V voltage relay
Technical data
1- / 3-phase
1
Auxiliary voltage
Without
Enclosure design
Switch cabinet
Nominal voltage max.
AC 400 V
Output contacts
2 C/O contacts
Width
45 mm
Type
BA 9037
Operate delay
Variant
Contact equipping
2 changeover contacts
Nominal voltage
AC/DC 24 V
Time delay
without
Variant
Without time delay
The voltage relay BA9037.12/001AC/DC24V from Dold is a disconnecting device for monitoring DC and AC voltage networks in industrial applications. It enables early detection of under- and over-voltages in single-phase systems and allows for preventive maintenance to avoid operational disruptions and damage to connected devices. The device is designed for use in enclosures and operates on the standby current principle, where the output relay is not activated in the event of a fault, ensuring safe and reliable signal transmission.
Applications
This relay is suitable for use in industrial plants, such as in manufacturing automation, power supply systems, or machine controls. It monitors voltages in the range of 24 to 400 V AC/DC and is specifically designed for applications requiring high operational safety and availability. The harmonic insensitivity makes it suitable for networks with non-sinusoidal voltage waveforms, such as those occurring with frequency converters or power electronics.
Functions and Equipment in Detail
The device features 2 changeover contacts as output contacts, used for load protection and signal transmission. The pickup and drop-out values are continuously and independently adjustable, with an adjustment range between 0.7 and 1.3 times the nominal voltage. The hysteresis is less than 4 % of the nominal value, ensuring precise and reliable switching behavior. The LED indicators signal operational readiness (upper LED) and contact position (lower LED), facilitating diagnostics during operation.
Technology Explained Simply
The input voltage is taken directly from the network to be monitored. The nominal voltage is AC/DC 24 V, although the device is also suitable for higher voltages up to 400 V AC. The pickup delay is activated, meaning the relay does not react immediately to voltage deviations but includes a short delay to filter out brief voltage fluctuations. The switch-off delay is less than 20 ms at 24 V, ensuring a rapid response in the event of a fault.
Compatibility and Accessories
The relay is compliant with IEC/EN 60255-1 and suitable for use in overvoltage category III (up to 300 V) and category II (> 300 V up to 400 V). The switching capacity is rated AC 15 up to 3 A at AC 230 V for closing contacts and 1 A for opening contacts. The electrical life is 500,000 switching operations at 3 A and AC 230 V, while the mechanical life exceeds 30 million switching operations. The maximum fuse rating is 4 A gG/gL. The terminals are designed according to DIN 46228-1/-2/-3/-4 and allow connection of 2 x 2.5 mm² solid or 2 x 1.5 mm² stranded conductors.
Mounting and Installation
The device is designed for installation in enclosures and has a width of 45 mm, making it suitable for standard control panels. The terminals are equipped with self-piercing terminal inserts to ensure a secure connection. Mounting is done via screw fastening in the enclosure. The operating temperature range is from -40 °C to +70 °C, and the storage temperature range is from -40 °C to +60 °C. The operating altitude is limited to a maximum of 2000 m.
Advantages in Operation
The relay offers high reliability through continuous adjustment of pickup and drop-out values, harmonic insensitivity, and LED status indicators. The function without auxiliary voltage reduces installation complexity. The EMC immunity according to IEC/EN 61000-4-2 to -4-6 ensures stable operation even in electromagnetically stressed environments. The protection rating IP 40 for the housing and IP 20 for the terminals protects against mechanical impacts and contact, but not against splashing water or dust.