| Technical data |
| Enclosure design | Front panel mounting |
| Width | 96 mm |
| Type | EH 5861 |
| Variant |
| Variant | Für UH 5892, AN 5873 |
The
display instrument EH5861/004 from
Dold is a front panel mounting device for visual indication of the current insulation resistance in electrical networks. It is externally connected to the analog output of an insulation monitoring device, such as the UH 5892 or AN 5873, and displays the resistance value in
kΩ. The device is designed for use in industrial and technical installations where continuous monitoring of insulation quality is required to ensure preventive fire protection and system protection.
Applications
This display instrument is universally applicable in ungrounded
AC, DC, and AC/DC networks with a rated voltage up to 1000 V. It is particularly suitable for monitoring
photovoltaic systems, including those with thin-film technology, as well as
UPS systems, networks with frequency converters, battery networks, DC drives, and hybrid or battery-powered vehicles. The display enables rapid fault localization through selective earth fault detection, thereby improving maintenance and service efficiency.
Functions and Equipment in Detail
The device features an
LED chain that visually indicates the current insulation resistance value. The display is designed for operation with an analog output providing a voltage or current signal in the range
0 ... 10 V or
0 ... 20 mA (alternatively
2 ... 10 V /
4 ... 20 mA). These signals can be connected to higher-level control systems, such as a PLC, or to external display units. The display operates in real time, enabling continuous monitoring of the network status.
Technology Explained Simply
The display instrument itself does not perform any measurement; it serves exclusively for the visual representation of a value already measured. It is therefore not an independent monitoring device, but an add-on module connected to a primary insulation monitoring device. The display is achieved via an LED chain, which, depending on the incoming analog signal, indicates the corresponding brightness or number of illuminated LEDs. The width is
96 mm, making it suitable for installation in standard control panels. The housing design is for
front panel mounting, allowing direct installation into a control panel.
Compatibility and Accessories
The display instrument is specifically designed for use with insulation monitoring devices
UH 5892 and
AN 5873. It is operated via the analog output of these devices and displays the measured insulation resistance value. Compatibility is ensured through specific signal transmission (0–10 V, 0–20 mA, 2–10 V, 4–20 mA).
Mounting and Installation
Mounting is performed by front panel installation into a control panel. The width of
96 mm corresponds to the standard format for industrial devices. The connection terminals are intended for connection to the analog output of the main device. No additional mounting aids or tools are required, except a screwdriver for securing the device in the enclosure.
Operational Advantages
The visual display of insulation resistance enables quick and intuitive assessment of the network status. The display supports fault localization and reduces response time in case of insulation faults. Integration into existing monitoring systems is simple via the analog output, eliminating the need for additional measuring devices or pre-stage equipment. Operational safety is enhanced by continuous display, especially in installations with high network capacitance or in de-energized networks where monitoring is still required.