Dold 0030096, EAN: 4030641300968

Dold 0030096 under-voltage relay 0.5-10s

Dold 0030096 under-voltage relay 0.5-10s

Lieske Part No. 1153823
Mfg Part No 0030096
EAN-Code 4030641300968
Manufacturer Dold
Here only 293,22 EUR
348,93 EUR incl. VAT

Further information for Dold 0030096 under-voltage relay 0.5-10s

Technical data
1- / 3-phase3
Auxiliary voltageWithout
Enclosure designSwitch cabinet
Nominal voltage max.3/N AC 690 / 400 V
Output contacts2 C/O contacts
Width45 mm
TypeBA 9043
Operate delayYes
Variant
Contact equipping2 changeover contacts
Nominal voltage3/N 290/500 V
Time delay0,5 - 10 s
Approvals and MarkingsUKCA
VariantFor 3p4w systems. With adjustable time delay
The under-voltage relay BA9043/002 from Dold is an industrial monitoring switch for 3-phase AC networks with neutral conductor. It is designed for continuous monitoring of the supply voltage and responds to under-voltage conditions by switching the output contacts. The device is rated for nominal voltages of 3/N AC 290/500 V and can be used in networks with frequencies from 50 to 400 Hz. Measurement is performed via arithmetic mean value calculation, where each phase is measured against the neutral conductor. The setpoints for pickup and drop-out values are continuously adjustable via rotary potentiometers on the front of the device, allowing application-specific adaptation.

Applications
This relay is suitable for industrial applications as well as for railway installations, where reliable voltage monitoring is required. It is mounted in enclosures and serves to protect machines, systems, and electrical installations from damage caused by voltage dips. Use in networks with or without neutral conductor is possible, with the variant described here specifically designed for 3p4w systems (three phases, four conductors).

Functions and Features in Detail
The device features two changeover contacts as output contacts, which trigger switching operations in the event of a fault. The time delay is adjustable between 0.5 and 10 seconds and only applies when the voltage is at least 60 % of the nominal voltage. Below 40 % of the nominal voltage, the output relay drops out immediately. The function is based on the zero-current principle, where the output relay is not activated in the event of a fault, ensuring safe disconnection. Operational readiness and contact status are indicated by LED displays – a red LED indicates that supply voltage is present, while a green LED indicates that the output relay is active.

Technology Explained Simply
The arithmetic mean value measurement ensures that the total voltage of the three-phase network is accurately detected, regardless of phase shifts. The adjustable pickup values (0.85 to 1.05 U_N) and hysteresis (0.75 to 0.95 of the pickup value) allow precise adaptation to the specific installation. Immunity to harmonics ensures reliable operation even in networks with high harmonic loads. The operating temperature range is from -20 °C to +60 °C, and the storage temperature range is from -25 °C to +60 °C. The maximum operating altitude is limited to 2000 m above sea level.

Compatibility and Accessories
The relay is suitable for networks with frequencies from 50 to 400 Hz and complies with the standard IEC/EN 60255-1. It is designed for continuous operation and has an electrical life of up to 200,000 switching operations at 3 A and AC 230 V. The mechanical life exceeds 30 million switching operations. Mounting is on a DIN rail in accordance with IEC/EN 60715. The terminals are designed for 2 x 2.5 mm² rigid or 2 x 1.5 mm² flexible conductors with shrink or screw sleeves. Fixing is done using M3.5 plus-minus screws with self-lifting bushings.

Mounting and Installation
Installation is carried out in an enclosure on a DIN rail. The connection terminals are clearly labeled: L1, L2, L3, and N for the network to be monitored, and contacts 11, 12, 14 and 21, 22, 24 for the output contacts. The values are adjusted using the two rotary potentiometers on the front panel.

Operational Advantages
Using the BA9043/002 enables preventive maintenance, as voltage dips are detected and documented early. Rapid fault localization reduces downtime and increases productivity. The LED indicators provide visual feedback on the operating status, simplifying maintenance and diagnostics. Immunity to harmonics and adjustable setpoints ensure high reliability in complex electrical systems. The UKCA certification confirms compliance with applicable European safety requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1153823
qrcode für Dold 0030096 under-voltage relay 0.5-10s