Further information for Dold 0029838 IK8813.81 energy-saving switch 230V AC50/60Hz
Technical data
Depth
58 mm
Output contacts max.
1 C/O contact
Thermal current Ith
10 A
Width
17,5 mm
Type
IK 8813
Cutoff-before-time capability
Variant
Contact equipping
1 changeover contact, delayed
Nominal voltage
AC 230 V
Time range
0,5 - 10 min
The energy-saving switch IK8813.81 from Dold is an electronic time relay switch for rail mounting, designed for controlled switching off of lighting installations and electrical consumers. The device is designed for a nominal voltage of AC 230 V and a nominal frequency of 50/60 Hz, and allows setting of an operating time between 0.5 and 10 minutes. The contact configuration includes a delayed changeover contact, rated for a maximum thermal current load of 10 A. The width is 17.5 mm and the depth is 58 mm, making the device suitable for standard DIN rail mounting.
Applications
The IK8813.81 is used for the automatic switching off of lighting such as stairwell, courtyard, garden, garage, storage, and basement lighting, as well as fans, dryers, and other electronic consumers that are often not switched off immediately after use. The function reduces energy consumption by automatically ending the operating time after a defined period. Switching off can also occur before the set time elapses, enabling flexible use.
Functions and equipment in detail
The device is activated via an external push-button, connected via a 3- or 4-wire connection. Control is via the live wire, requiring both the push-button and the device to be connected to the same phase. The operating time is adjustable using a screwdriver. An integrated permanent light switch enables continuous operation, and a red LED indicates the state of the output relay – illuminated when contact 15–18 is closed. The switching function is delayed, meaning the output switches only after the set time has elapsed following activation.
Technology explained simply
The energy-saving switch is controlled by an electronic timing element that precisely maintains the preset operating time. Repeatability accuracy is ±2 % of the scale end value, ensuring reliable and reproducible operation. The nominal power consumption values are 5 VA (apparent power) and 0.3 W (active power). The switching capacity is rated for incandescent lamp loads up to 1200 W and fluorescent lamp loads (duo circuit) up to 20 lamps at 58 W each. Short-circuit resistance is ensured by a maximum fuse rating of 10 A gG/gL according to IEC/EN 60947-5-1.
Compatibility and accessories
The device is compatible with push-buttons connected via a 3- or 4-wire connection. For installation in flush-mounted boxes, the model OA 8823 is intended, which is also equipped with a permanent light switch and LED indicator. Terminal markings follow EN 50005, with standardised connections A1 (L), A2 (N), and T (control input), as well as contact terminals 15, 16, and 18. The enclosure protection rating is IP 40, and the terminals are rated IP 20, providing protection against contact and dust, but not against water.
Mounting and installation
The IK8813.81 is designed for mounting on a DIN rail (DIN rail construction). The depth of 58 mm requires sufficient space in the enclosure. Installation is carried out via the designated terminal connections, ensuring correct assignment of wires (live, neutral, control input). The mechanical service life exceeds 10⁶ switching operations, ensuring high operational reliability over a long period.
Advantages in operation
Automatic switching off after a defined time interval reduces energy consumption in areas with irregular usage. The ability to switch off the device before the set time elapses provides additional flexibility. The LED indicator allows visual monitoring of the switching state. Compliance with standards EN 60 669-1 and EN 60 669-2-1 ensures electrical safety and functionality. Operating temperature ranges from -20 °C to +45 °C, and storage temperature from -20 °C to +60 °C, enabling use in various environments. The operating altitude is limited to below 2000 m.