Further information for Dold 0029830 IK8813.81AC50/60HZ230V3-60M energy-saving switch
Technical data
Depth
58 mm
Output contacts max.
1 C/O contact
Thermal current Ith
10 A
Width
17,5 mm
Type
IK 8813
Cutoff-before-time capability
Variant
Contact equipping
1 changeover contact, delayed
Nominal voltage
AC 230 V
Time range
3 - 60 min
The energy-saving switch IK8813.81AC50/60HZ230V3-60M from Dold is an electronically controlled disconnect device for the controlled switching off of loads, particularly lighting installations such as stairwell, courtyard, garden, garage, storage room, and basement lighting, as well as fans, dryers, and other electronic devices that are not immediately switched off after use. The device is designed for use in industrial and commercial facilities as well as in residential buildings, where automatic switching off after a preset time contributes to energy savings.
Applications
This switch is suitable for controlling loads that are not immediately switched off after use, to avoid unnecessary energy consumption. Typical applications include lighting in hallways, garages, basements, or storage rooms, as well as controlling fans or dryers in industrial or commercial environments. The function enables targeted switching off after a defined time, thereby reducing energy costs.
Functions and Equipment in Detail
The IK8813.81 features a delayed contact configuration with a changeover contact that remains active for a preset time period after actuation of the control button. The operating time can be set between 3 and 60 minutes, with adjustment made using a screwdriver. An integrated permanent lighting switch allows for continuous operation, and a red LED indicates whether the output relay contact (15–18) is closed. The device can be switched off before the preset time expires, allowing for flexible use.
Technology Explained Simply
Control is achieved via an electronic timing element that precisely maintains the preset operating time. The repeatability accuracy is ±2 % of the scale end value, ensuring reliable and reproducible operation. The rated voltage is AC 230 V at a frequency of 50/60 Hz. The thermal current Ith is 10 A, indicating the maximum load capacity of the device. The switching capacity for incandescent lamps is 1200 W; for fluorescent lamps in dual configuration (series-compensated), up to 20 lamps at 58 W each are possible. The maximum short-circuit withstand requires a fuse with 10 A gG/gL according to IEC/EN 60947-5-1.
Compatibility and Accessories
The switch is designed for rail mounting and has a width of 17.5 mm, making it suitable for standard DIN rails. The depth is 58 mm. Control is via a button, with both 3- and 4-wire connections possible. The button and the device must be connected to the same phase. For installation in flush-mounted boxes, the variant OA 8823 is available, but it is not part of this item. Terminal markings follow EN 50005.
Installation and Mounting
Mounting is done on a DIN rail (DIN rail construction), with the width of 17.5 mm ensuring compatibility with standard distribution boxes. The connection terminals are designed for wire connections, and electrical connections are made via terminals A1 (L), A2 (N), and T (control input). The LED indicator facilitates visual inspection of the operating status.
Operational Advantages
The switch reduces energy consumption by automatically switching off after a defined time. The ability to switch off the device before the operating time expires provides additional flexibility. The mechanical life exceeds 10⁶ switching operations, ensuring high operational reliability and longevity. The operating temperature ranges from -20 °C to +45 °C, making the device suitable for use in demanding climatic environments. The protection rating is IP 40 for the housing and IP 20 for the terminals, protecting against contact and foreign objects, but not against water or dust. Electromagnetic compatibility according to EN 61000-4-2 to -5 and radio interference suppression class B (EN 55011) ensure reliable operation in electrical installations.
Standards and Approvals
The device complies with standards EN 60 669-1 and EN 60 669-2-1, which apply to electrical switches and switching devices. The operating altitude is limited to below 2000 m, and the storage temperature is -20 °C to +60 °C. Creepage and clearance distances correspond to pollution degree 2 with a rated impulse withstand voltage of 4 kV according to IEC 60664-1. Vibration resistance is tested according to IEC/EN 60068-2-6 with an amplitude of 0.35 mm and frequencies from 10 to 55 Hz.
Functional Safety and Operation
The switching function is ensured by the delayed contact position, with the changeover contact remaining active for the set time after actuation of the button. The LED indicator signals the closed state of the contact (15–18). The operating time is adjusted manually using a screwdriver, allowing individual adaptation to the specific application. Operational safety is ensured by the mechanical life of over one million switching operations and the electrical strength of the terminals.
Connection and Operational Safety
The connection terminals are clearly marked: A1 (L), A2 (N), and T (control input). Connection to the button is made via the control input T. The electrical connection must be secure and correct to ensure operational safety. The maximum switching capacity for incandescent lamps is 1200 W, enabling use in typical lighting installations. Short-circuit withstand requires a fuse with 10 A gG/gL to ensure safety in the event of a fault.