Dold 0029465, EAN: 4030641294656

Dold 0029465 BA9041 3AC60HZ 440V phase sequence relay

Dold 0029465 BA9041 3AC60HZ 440V phase sequence relay

Lieske Part No. 1002068
Mfg Part No 0029465
EAN-Code 4030641294656
Manufacturer Dold
Here only 193,77 EUR
230,59 EUR incl. VAT

Further information for Dold 0029465 BA9041 3AC60HZ 440V phase sequence relay

Technical data
1- / 3-phase3
Enclosure designSwitch cabinet
Measuring range max.500 V
Output contacts2 C/O contacts
Standard measuring range3 AC 400 V
Width45 mm
TypeBA 9041
Variant
Contact equipping2 changeover contacts
Nominal voltage3AC 440 V 60 Hz
The phase sequence relay BA 9041 from Dold monitors the correct phase sequence L1 - L2 - L3 as well as the presence of all three phase voltages in a three-phase power network. It is designed for use in industrial installations, where the correct rotation direction of drives, particularly motors, must be ensured. The device is mounted in enclosures and is rated for a nominal voltage of 3AC 440 V at a frequency of 60 Hz. The width is 45 mm, enabling compact mounting on a DIN rail.

Applications
This relay is suitable for applications where an incorrect phase sequence could result in wrong rotation direction of electric motors, leading to damage or inefficient operation. It is used in industrial installations such as manufacturing, processing industries, or pump and fan systems, where the reliability of power supply and correct motor control are critical. Monitoring is continuous, and the device is designed for operating temperatures from -20 °C to +60 °C.

Functions and Equipment in Detail
The BA 9041 features two changeover contacts as output contacts, which switch to the operating position when the correct phase sequence and presence of all three phase voltages are detected. Contacts 11-14 and 21-24 close, and a green LED lights up, visually indicating the operational status. In case of a phase failure, where the voltage in one phase drops below 60 % of the nominal voltage, the relay is de-energized. The response time is less than 100 ms, and the reset time is less than 50 ms. The contact configuration allows control of auxiliary circuits, e.g., for warning signals or shutdowns.

Technology Explained Simply
The device detects incorrect phase sequence by checking the order of voltage phases L1, L2, and L3. If the sequence is correct, the output is activated. In case of a phase failure or incorrect sequence, the output is deactivated. The input voltage range is 0.8 to 1.1 times the nominal voltage, with the nominal voltage being 3AC 440 V. The frequency range covers ±5 % around the nominal frequency of 60 Hz. The device consumes less than 3.5 VA during operation. The switching capacity is 2 A at AC 230 V for closing contacts and 1 A at AC 230 V for opening contacts, according to IEC/EN 60947-5-1. The electrical life expectancy is at least 250,000 switching operations at 3 A and AC 230 V with cos ϕ = 1.

Compatibility and Accessories
The relay is designed for use in networks with overvoltage category III up to 3 AC 480 V and category II for 3 AC 500 V. It complies with the standard IEC/EN 60255-1. The terminals are designed for connection with solid conductors up to 2.5 mm² or flexible conductors up to 1.5 mm² using tube screw terminals. Mounting is on a DIN rail. The enclosure protection rating is IP 40, and the terminals are rated IP 20. In networks with high harmonic content, such as thyristor installations or reactive power compensation systems, the device may be affected by measurement distortions. In such cases, it is recommended to test a sample device on-site to verify suitability.

Mounting and Installation
Mounting is on a DIN rail inside the enclosure. The connection terminals are designed for solid or flexible conductors, with a stripping length of 10 mm. Fastening is done with a torque of 0.8 Nm. Terminal marking follows EN 50005. The maximum operating altitude is 2000 m above sea level. The mechanical life expectancy is at least 50 million switching operations.

Operational Advantages
The simple wiring and clear visual indication via the green LED facilitate commissioning and maintenance. Reliable phase sequence monitoring protects motors from damage due to incorrect rotation direction. Compliance with the standard IEC/EN 60255-1 ensures conformity with industrial standards. The short response and reset times ensure rapid reaction to disturbances. EMC testing according to IEC/EN 61000-4-2 to -4-6 ensures functionality in electromagnetically demanding environments. The IP 40 protection rating safeguards against contact with moving parts and against solid objects larger than 1 mm.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1002068
qrcode für Dold 0029465 BA9041 3AC60HZ 440V phase sequence relay